Probs Marvel G400 capturing after reinstallation : Green flashes

[This_Idiot]

My understanding is that the 5.41's aren't supported for capture, so you are probably better off going back to 5.30 if vidcap is important to you

[ccc]

Probs Marvel G400 capturing after reinstallation : Green flashes

Hi,

I reinstalled my PC (WIN98...) with the latest vid tool 1.51 and G400 driver 5.41
Now when I try capturing sthing from TV, It's full of green flashes every +- 1 sec, so it is not usable anymore. (and also a line garbage above when it's from TV (teletext info???))
Before I reinstalled my system, I didn't have that problem. So what went wrong ?

[ccc]

Hi,

I reinstalled my test-partition with my previous Powerdesk version. But the problem is still there
In fact I think the image is sometimes (+- every 2 seconds) misplaced for one half. (the upper seems good, while the part under seems to be one inch too much to the right and mostly green or rose, or ...)
I will post a screen-shot later on...
;(

[ccc]

well...
It's not better...
what I will try is to make the changes in my bios (FIC PA 2013) tommorrow. Maybe that's th e problem?

If you want to see the screenshots: http://www.multimania.com/fauconng/file1.jpg
http://www.multimania.com/fauconng/file2.jpg
http://www.multimania.com/fauconng/file3.jpg
http://www.multimania.com/fauconng/file4.jpg

[ccc]

Trouvé!!! found it!
It was the settings in my bios I changed that caused these errors ... (I have a Fic PA 2013 ...)

Now it works!!!

[Fred H]

ccc,
I also have a FIC PA-2013/+ K6-2/400 and 5.25, but intend to upgrade the PD.
What did you do with your BIOS, more details, please?