Announcement

**space7** · 17 November 1999, 08:11

Just an intuition. The type of files that your computer say that you are missing id .dll files ? Before the freeze sound bluster sound became corumpted ? Just need the respond that to quetion and a IRQ config will be helpful.

------------------
My concern is with growth. You must grow to become one, to become whole, to become sane. I am not going to force sanity upon you. Rather, I am going to bring out your insanity. When it is pulled out completely, throw into the wind, sanity will happen to you, you will grow. You will be transformated. That is the meaning of meditation

Osho
--------------
I will try to use a dictionary when I can't
(Corrected by Robert&Collins dictionary)

**Kenny[SP]** · 17 November 1999, 10:35

I see what you mean, but my sblive is NOT the problem... it uses actually irq 5 and shares irq7 with printer port (though i can disconnect the sb16 emulation) the only irq shared is irq 11 between the ethernet car and usb port... (and the two of them are working flawless)....

The random error messages i get, when i first boot, are related to ntkern.vxd, or kernel32.dll, or user32.dll... these messages are always the same x files has been deleted or is missing from you windows\system directory.. etc etc blah blah blah.. i push the reset button and everything is perfect....

That's pretty bad... i had a dc390 f with the old ultra wide 4.3 giga hd, there were no problem with the actual config.. upgrading to a dc390u2w with an ultra 2 disk and it goes bad.... i tryed any combination possible with the scsi terminators and id's always the same sh*t......

Anyone know a very good diagnosis program for hardisk ?....

thanks in advance..

Ken

**Alfie** · 17 November 1999, 19:17

Have you attempted to restore the files from your win98 disk?
Might be a logical place to start.

**Kenny[SP]** · 18 November 1999, 07:40

i have just reformated my hd.... put again that funky win98se... and want to know ? nothing changed....nothing... i made a mobo bios upgrade.. but ....

for now this is quiet a mistery.....
the thing i can say, i bench my disk using sandra and norton utilities, in physical read throughput i get 31.3 Mb/s this is twice as a friend that own a piii an adaptec ultra 2 card and the same disk... (he gets 17+) using sandra i get 9300+.... are my numbers good ? or are they quiet (anormaly) high ?

I will install win98se on my uwide disk and see if it still happens... i know that on my udma disk there is no problem.. but it's too slow....

Ken

**HedsSpaz** · 18 November 1999, 09:05

Here's another thought for you. As I am sure you are well aware, HD's need a few seconds to spin up, especially SCSI drives, it's possible that one of the drives isn't getting enough time to spin up fully before windows try's to access it. See if either in your bios or the SCSI adapter bios you can set a pre-delay of 3-5 seconds or so.

**Kenny[SP]** · 19 November 1999, 08:57

hmmm quiet good idea... i will investigate in thanks... but i don't think an ultra2 7200 rpm scsi disk needs really time to spin up...
I have found something, my 3com 905btx was using drivers from win98 se.. i removed them and install files i have downloaded.. now the random error messages have desapeared...
Btw when i first boot, i always have the funky windows start screen that freezes... or stay as is but nothing is changed...

ken

Thanks for your income they are greatly apreciated

Announcement

please help

please help

Comment

Comment

Comment

Comment

Comment

Comment