Hi:
I’ve begun ordering the new parts for my system (see below) and would like to replace my ol’ Thrustmaster FCS Mark 1 joystick with something newer/better. I haven’t done a lot of gaming in the past but will likely try more of it now. First Person Shooters, Racing and Flight Sims are probably at the top of my list.
Force Feed-back in some form would be nice. I’ve been using Logitech mice and keyboards and like their features/support. How do their joysticks rate with the competition?
I’d like a stick that doesn’t come with an initially steep learning curve. One that you plug in, configure for all of the basic/usual parameters and fine-tune/tweak later as required/desired. Microsoft joysticks would be OK but I’ve heard of problems with WinXP. Seitek I know nothing about.
This system will be complex enough as it is. I won’t be enabling any serial, parallel nor any game ports. USB is what I prefer. The only other USB 1.x device I’ll have is a printer which wouldn’t be active at the same time so compatibility/conflicts shouldn’t be a problem. Both main CRTs have powered USB hubs and there will be one open USB port open on the rear I/O as well as the ones on the front of the case that are connected to the mainboard’s extra USB header. Any of these ports preferable for the joystick?
Price is not nearly as important as reliability, quality and timely non-buggy driver support.
WinXP HE clean
P4 2.8GHz retail
1GB (4x256MB) Kingston PC1066 RIMM
Asus P4T533-C i850e/s478 (on board LAN to DSL)
Promise Ultra133 PCI controller card:
-IDE0: Maxtor 80GB 740X ATA-133 7200RPM FDB (boot)
-IDE1: “ “ “ “
Mainboard controller:
-Primary: Plextor W4012 CD-R/RW
-Secondary: Toshiba M1612 DVD-ROM
Turtle Beach Santa Cruz PCI sound card
-Analog & S/PDIF to Denon 3802 7x110W based HT
Matrox Parhelia-512 Retail
-VGA1: ViewSonic P225 21” shadow mask CRT
-VGA2: ViewSonic P817 21” shadow mask CRT
-VGA3: ViewSonic 17-PS-2 17” shadow mask CRT
-TV: S-video via Denon to 36” Sony Wega XBR NTSC
Canon S750 BJ printer (USB1.1)
Canon D1250U2F CanoScan scanner (USB 2.0)
Logitech Cordless USB & PS/2 keyboard (as PS/2)
Logitech Mouseman USB & PS/2 Dual Optical mouse (as PS/2)
Lian-Li PC-68 case
Enermax EG651P-VE FMA 550W PSU
What stick(s) would you recommend for this system and the types of gaming I’ll be doing?
Thanks in advance,
I’ve begun ordering the new parts for my system (see below) and would like to replace my ol’ Thrustmaster FCS Mark 1 joystick with something newer/better. I haven’t done a lot of gaming in the past but will likely try more of it now. First Person Shooters, Racing and Flight Sims are probably at the top of my list.
Force Feed-back in some form would be nice. I’ve been using Logitech mice and keyboards and like their features/support. How do their joysticks rate with the competition?
I’d like a stick that doesn’t come with an initially steep learning curve. One that you plug in, configure for all of the basic/usual parameters and fine-tune/tweak later as required/desired. Microsoft joysticks would be OK but I’ve heard of problems with WinXP. Seitek I know nothing about.
This system will be complex enough as it is. I won’t be enabling any serial, parallel nor any game ports. USB is what I prefer. The only other USB 1.x device I’ll have is a printer which wouldn’t be active at the same time so compatibility/conflicts shouldn’t be a problem. Both main CRTs have powered USB hubs and there will be one open USB port open on the rear I/O as well as the ones on the front of the case that are connected to the mainboard’s extra USB header. Any of these ports preferable for the joystick?
Price is not nearly as important as reliability, quality and timely non-buggy driver support.
WinXP HE clean
P4 2.8GHz retail
1GB (4x256MB) Kingston PC1066 RIMM
Asus P4T533-C i850e/s478 (on board LAN to DSL)
Promise Ultra133 PCI controller card:
-IDE0: Maxtor 80GB 740X ATA-133 7200RPM FDB (boot)
-IDE1: “ “ “ “
Mainboard controller:
-Primary: Plextor W4012 CD-R/RW
-Secondary: Toshiba M1612 DVD-ROM
Turtle Beach Santa Cruz PCI sound card
-Analog & S/PDIF to Denon 3802 7x110W based HT
Matrox Parhelia-512 Retail
-VGA1: ViewSonic P225 21” shadow mask CRT
-VGA2: ViewSonic P817 21” shadow mask CRT
-VGA3: ViewSonic 17-PS-2 17” shadow mask CRT
-TV: S-video via Denon to 36” Sony Wega XBR NTSC
Canon S750 BJ printer (USB1.1)
Canon D1250U2F CanoScan scanner (USB 2.0)
Logitech Cordless USB & PS/2 keyboard (as PS/2)
Logitech Mouseman USB & PS/2 Dual Optical mouse (as PS/2)
Lian-Li PC-68 case
Enermax EG651P-VE FMA 550W PSU
What stick(s) would you recommend for this system and the types of gaming I’ll be doing?
Thanks in advance,
Comment