Tweet
Hollywood+ & G400
Hello again!
Ok Here's one for you all.
Hollywood+ DVD output to monitor skips frames (not tried to TV yet, need to buy a v long cable!)
The skipping frames problem never occured before I got my G400. Sigma's support's emails to me is reading like the magna carta trying to solve this one.
The Matrox DVD player works fine (picture quality not as clear/sharp as H+ but non the less plays fairly well for a software/accellerator DVD player.
My specs (you may recall these from a lengthy post a while back
)
FIC 503+ SS7 Mobo
K6 2 400
16Mb G400 AGP Sngle Monitor
96Mb Ram
SB Live Value
DVS DVD rom 5x (sec master)
Traxdata CDRW 2x2x6 (sec slave)
Primary Master Fujitsu 6.0 Gb UDMA 33
Primary Slave Samsung 4.0 Gb UDMA 33
IRQ's
0 System timer
1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 Communications Port (COM2)
4 Communications Port (COM1)
5 Creative SB Live! SB16 Emulation
6 Standard Floppy Disk Controller
7 Printer Port (LPT1)
8 System CMOS/real time clock
9 IRQ Holder for PCI Steering
9 Matrox Millennium G400 - English
10 Creative SB Live! Value
10 VIA Tech PCI to USB Universal Host Controller
10 IRQ Holder for PCI Steering
10 IRQ Holder for PCI Steering
11 REALmagic Hollywood Plus
11 IRQ Holder for PCI Steering
12 Genius NetScroll Optical (PS/2)
13 Numeric data processor
14 Primary Bus Master IDE controller (dual fifo)
14 VIA Bus Master PCI IDE Controller (Ultra DMA)
15 Secondary Bus Master IDE controller (dual fifo)
15 VIA Bus Master PCI IDE Controller (Ultra DMA)
DMA's
1 Creative SB Live! SB16 Emulation
2 Standard Floppy Disk Controller
4 Direct memory access controller
5 Creative SB Live! SB16 Emulation
0 (free)
3 (free)
6 (free)
7 (free)
Resolution = 1152 x 864 16 bit (tried most others too!)
Everything bang up to date with drivers, firmware etc. etc.
Win98SE.
All help or suggestions appreciated.
Thanks
------------------
Rgds
Don (Kiddik)Davidson
"Welcome Back my Friends to the Show that Never Ends"
Ok Here's one for you all.
Hollywood+ DVD output to monitor skips frames (not tried to TV yet, need to buy a v long cable!)
The skipping frames problem never occured before I got my G400. Sigma's support's emails to me is reading like the magna carta trying to solve this one.
The Matrox DVD player works fine (picture quality not as clear/sharp as H+ but non the less plays fairly well for a software/accellerator DVD player.
My specs (you may recall these from a lengthy post a while back
)FIC 503+ SS7 Mobo
K6 2 400
16Mb G400 AGP Sngle Monitor
96Mb Ram
SB Live Value
DVS DVD rom 5x (sec master)
Traxdata CDRW 2x2x6 (sec slave)
Primary Master Fujitsu 6.0 Gb UDMA 33
Primary Slave Samsung 4.0 Gb UDMA 33
IRQ's
0 System timer
1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 Communications Port (COM2)
4 Communications Port (COM1)
5 Creative SB Live! SB16 Emulation
6 Standard Floppy Disk Controller
7 Printer Port (LPT1)
8 System CMOS/real time clock
9 IRQ Holder for PCI Steering
9 Matrox Millennium G400 - English
10 Creative SB Live! Value
10 VIA Tech PCI to USB Universal Host Controller
10 IRQ Holder for PCI Steering
10 IRQ Holder for PCI Steering
11 REALmagic Hollywood Plus
11 IRQ Holder for PCI Steering
12 Genius NetScroll Optical (PS/2)
13 Numeric data processor
14 Primary Bus Master IDE controller (dual fifo)
14 VIA Bus Master PCI IDE Controller (Ultra DMA)
15 Secondary Bus Master IDE controller (dual fifo)
15 VIA Bus Master PCI IDE Controller (Ultra DMA)
DMA's
1 Creative SB Live! SB16 Emulation
2 Standard Floppy Disk Controller
4 Direct memory access controller
5 Creative SB Live! SB16 Emulation
0 (free)
3 (free)
6 (free)
7 (free)
Resolution = 1152 x 864 16 bit (tried most others too!)
Everything bang up to date with drivers, firmware etc. etc.
Win98SE.
All help or suggestions appreciated.
Thanks
------------------
Rgds
Don (Kiddik)Davidson
"Welcome Back my Friends to the Show that Never Ends"