No audio on final recording

[Video Rookie]

I'm new to video editing and I
m having problems saving my completed video.

When I save my completed video to tape, I can capture the video, butlose the audio. I can hear the audio through my remote speakers as I record, but not through the TV speaker. I'm using the dualhead feature and have my RCA output cables from the bob connected directly to the back of my VCR.I have a matrox G400TV card and a soundblaster 16PCI audio card.

Anybody out there have this problem figured out? Appreciate the help.



------------------
Video Rookie

[DrMordrid]

Open your mixer program and make sure the line out isn't muted.

Dr. Mordrid

[Video Rookie]

Checked it, but looks like it's not muted. Any other advice? Thanks.

------------------
Video Rookie

[dieulinh]

Also make sure that the audio in (sub)cable of the Marvel cable is plugged into the line-out connector of your soundcard.

Hope this helps.

[Grepman]

I had this same problem with my G400 Marvel. The solution for me was to BYPASS the BOB .... I bought an adapter which allowed me to connect the RCA connectors directly from the VCR to the soundcard. Works great.

[Video Rookie]

Thanks for the tips. Turns out I did have my line in and line out cables switched on my sound card. It's working now.