SOftwarte crashes !

MK · 31 August 2001, 03:20

Maggi - there is no 440BX based mainboard that keeps the AGP bus in spec at 133 MHz FSB ! The AGP will be at least 89 MHz on the 2/3 ratio or 133 MHz on the 1/1 ratio.

MK

**Maggi** · 31 August 2001, 03:27

I think, the very latest revisions like 1.10 and onwards would offer it since those also offer quite a few more FSB settings and I'm pretty sure that a friend of mine has options for 124/31 , 124/41, 133/33 and 133/44 for FSB/PCI settings, but I have no clue if they also included an 1:2 divider for AGP.

Also the P3B-F is only an evolutionary step ahead form the P2B series, officially introducing SoftBIOS for OCing and some of the late P2B board could be modified to enable to already built in, but deactivated SoftBIOS.

Cheers,
Maggi

**dizzynoodle** · 31 August 2001, 05:49

there were too many errors...nothing was fixing the problem ! I just did a clean re-install o f win2k to a new directory !

Anyways, now i need a bit advice on the order of installing things;
i have a new thread on the issue as i thought the main culprit was the leaked VT tools... dunno,

Pls check it out and let me know....

BYW My MOBO is revision 1.10, it does support running 133Mhz there is even a jumper setting for running at 150Mhz [madness!]

http://forums.murc.ws/showthread.php?s=&threadid=28251

**Guru** · 31 August 2001, 06:03

w2k -> sp2 -> chipset drivers -> directX8 -> vga -> soundcards etc.!

**dizzynoodle** · 31 August 2001, 07:24

well i have installed all the hardware except the Matrox Drivers/VT, I guess SP2 does not need SP1 to be installed before it right ?

What do you meanchipset drivers ? Mobo ?

**Guru** · 31 August 2001, 07:52

No SP2 does not need SP1 to be installed!

Chipset drivers is the drivers for your "mobo" (APG, HD, PCI, ISA drivers etc.)!

**Maggi** · 31 August 2001, 08:05

Here's the link to the latest Intel chipset drivers

http://developer.intel.com/design/so...nfinst_enu.htm

Cheers,
Maggi

**dizzynoodle** · 31 August 2001, 08:38

do i need to install those ? i have never ever installed these ! I'm on a P2b 440BX based

**Maggi** · 31 August 2001, 08:50

well, if you don't have any problems, there's obviously no reason to upgrade your chipset drivers, but since you're having an instable system, it might be an idea to try it and see if it helps ...

MK · 31 August 2001, 10:06

Maggi - you are completely right concerning the PCI bus speed. But I was talking about and I am referring to the AGP speed.

Up to now there is no 440BX based board on earth with a 1/2 ratio for the accelerated graphics port. So if you are on 133 MHz FSB, the PCI may be in spec but the AGP is definately not.

MK

**Maggi** · 31 August 2001, 10:13

Thanx for feedback, MK !

**dizzynoodle** · 31 August 2001, 10:15

will that cause any system instability ? do drivers affect that, play a role ?

**Guru** · 31 August 2001, 12:10

Could couse espesialy if runing at AGP 4x!

MK · 31 August 2001, 13:27

Maggi - you`re welcome.

MK

**dizzynoodle** · 6 September 2001, 06:29

reviving an oldish thread !

How can i tell what speed my AGP is running ? I'm running a P2B @133 with a pIII800/133.

SOftwarte crashes !

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment