3ware controllers...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JerryH
    MURCer
    • Sep 1999
    • 124

    #1

    3ware controllers...

    Having had less than stellar luck with the HPT-370, I'm looking into another RAID card. I had a Promise-33 before and it worked great, but I'm wondering how the 3ware Escalade 7000-2 (7500 series?) compares in the price range (about $140) to the latest Promise cards.

    Are the Escalade cards true hardware raid, or are special drivers needed?
  • WayneHu
    MURCer
    • Sep 1999
    • 180

    #2
    Re: 3ware controllers...

    Originally posted by JerryH
    Having had less than stellar luck with the HPT-370, I'm looking into another RAID card. I had a Promise-33 before and it worked great, but I'm wondering how the 3ware Escalade 7000-2 (7500 series?) compares in the price range (about $140) to the latest Promise cards.

    Are the Escalade cards true hardware raid, or are special drivers needed?
    If you do not have 64-bit PCI slot, 7000 might not give you the best C/P value.

    I tried one set of RAID1 WD1000BB on 6410 and a single drive on the same controller. I just can say that the performance of this combination is no worse than the one by 2~3 IDE controllers. The 6410 performs just like 4 independent IDE controllers.

    On single HPT 370a, 372, FastTrak66, or ICH2, the disk I/O is slowed down when there are concurrent I/O transactions on channel #1 and #2, which there is just one drive attached on.
    P4-2.8C, IC7-G, G550

    Comment

    • UtwigMU
      Super MURCer
      • Jul 2002
      • 5651

      #3
      People on www.storagereview.com forum seem to like them.

      Comment

      • Marshmallowman
        Super MURCer
        • Sep 1999
        • 3416

        #4
        abit + highpoint = bad

        never had a problems with my epox kt133a + hp370
        but I have heard a LOT of problems about abit kt7's in general
        In general via chipsets do not handle RAID very well.

        having said that a RAID controller from a decent manufacturere should be a lot less problematic (promise or highpoint)

        Comment

        • Wombat
          Super MURCer
          • Aug 2000
          • 9498

          #5
          abit + highpoint = bad
          I prefer ( Abit || Highpoint) = bad
          Gigabyte P35-DS3L with a Q6600, 2GB Kingston HyperX (after *3* bad pairs of Crucial Ballistix 1066), Galaxy 8800GT 512MB, SB X-Fi, some drives, and a Dell 2005fpw. Running WinXP.

          Comment

          • Marshmallowman
            Super MURCer
            • Sep 1999
            • 3416

            #6
            Woah!!

            that 3ware escalade controller looks EXCELLENT.

            they are not true hardware RAID, but expect to double if not triple the price for real hardware RAID.

            looks like might have found my next RAID controller

            Thanks for the headsup

            Comment

            • Dr Mordrid
              Moderator
              • Apr 2001
              • 26592

              #7
              Marshmallowman;

              Don't get too excited as this market is going to heat up, and soon

              Dr. Mordrid
              Dr. Mordrid
              ----------------------------
              An elephant is a mouse built to government specifications.

              I carry a gun because I can't throw a rock 1,250 fps

              Comment

              • MultimediaMan
                Super MURCer
                • Sep 1999
                • 1905

                #8
                Doc Mod is right... Adaptec, Promise, and maybe one or two others are going to come on strong... And we get to buy the good.

                Promise is gonna be the odds-on favourite for an affordable RAID solution and let's hope, RAID 5 in SATA.
                Hey, Donny! We got us a German who wants to die for his country... Oblige him. - Lt. Aldo Raine

                Comment

                • JerryH
                  MURCer
                  • Sep 1999
                  • 124

                  #9
                  Doc Mod is right... Adaptec, Promise, and maybe one or two others are going to come on strong... And we get to buy the good.

                  Promise is gonna be the odds-on favourite for an affordable RAID solution and let's hope, RAID 5 in SATA.


                  Please inform...I've been out of the loop for a while (maybe I was never in it, ). It sounds like this Serial ATA is going to revolutionize IDE and HD's in general?

                  Comment

                  • Dr Mordrid
                    Moderator
                    • Apr 2001
                    • 26592

                    #10
                    SerialATA uses much smaller cables instead of the bloated parallel cables we've been using. It will also be faster; a bit right away and quite a bit faster later on. Legacy ATA drives can be used with SerialATA cables using a dongle.

                    SiS is first out of the box with SerialATA support in their new chipsets. Neither Intel or VIA are even close.

                    Shuttle will be using both parallel and SerialATA on their new AS45 (SiS 648 chipped) P4 board. Here's the pertinent page in THG's preview of the SiS 648 chipset;



                    Recommended reading: the whole SiS 648 article;

                    Motherboard reviews, news and features, created for the hardcore PC enthusiast by the experts at Tom's Hardware.


                    Dr. Mordrid
                    Last edited by Dr Mordrid; 14 August 2002, 13:08.
                    Dr. Mordrid
                    ----------------------------
                    An elephant is a mouse built to government specifications.

                    I carry a gun because I can't throw a rock 1,250 fps

                    Comment

                    • Taz
                      Super MURCer
                      • Nov 1999
                      • 1393

                      #11
                      GamePC have done a review of 3Wares first Serial ATA RAID controller which may be of interest

                      When you own your own business you only have to work half a day. You can do anything you want with the other twelve hours.

                      Comment

                      Working...