Nvidia related - driver overclocker question

[Admiral]

By any chance, does anyone know how to increase the maximum allowed frequency in the driver overclocker ? Some reghack or something.
I need to take the core of my Ti200 to 240 MHz and it only allowes for 220.
I'm using the 40.41 detonator so nvmax and other utilities won't work anymore.

[ZokesPro]

http://www.3dgpu.com/tweaking/files/coolbits.reg

Merge it into your registry and go into display properties and it should be there.

[Admiral]

That's what I used to open the hidden options (driver overclocker, refresh rate settings, agp settings...).

The problem is it only allowes for a maximum of 220 MHz for the core and 500 MHz for memory.
I need to increase the maximum allowed core frequency.

[K6-III]

How about using a program like NVMAX????

[ZokesPro]

Oops, my bad.

Note to self, pay attention before posting!

[Admiral]

NVMAX won't work with the new drivers.

Having a thought. If I were to force install my Ti200 as a Ti500, do you think it would set the clocks to 240/500 by default instead of 175/400 or at least widen the allowed frequency ?

[K6-III]

Powerstrip then???

[ZokesPro]

Originally posted by Admiral
NVMAX won't work with the new drivers.

Having a thought. If I were to force install my Ti200 as a Ti500, do you think it would set the clocks to 240/500 by default instead of 175/400 or at least widen the allowed frequency ?

I strongly doubt that that will work. But i've never tried.

You can always try guru3d.com and see if there are any good utils there to help you out.

[Admiral]

Powerstrip then???

For some unknown reason my Leadtek Ti200 TDH will only be stable at 240/500 if I use the driver overclocker.
WinFox (Leadtek's utility), PowerStrip, Riva Tunner are stable only at 200/500.

[Admiral]

Doh ! should've remembered that installing drivers through device manager (update driver), instead of the provided setup, keeps the old driver settings