BH6 rev 1.01 (not 1.1) will it work with coppermine CPU ?

[jackzod]

On Abit site they're not really clear wether it will work or not (voltage issue), anybody have a "real life " experience with that setting ?
thanks

[Greebe]

I wouldn't suggest it. That is unless your able to return it if it doesn't work or have the spare cash to pick up another MB too.

[Hugh G Recshun]

Jackzoff,

It should work fine, it does for me, and there are many other success stories on the net too.

Hugh G

[Greebe]

My point is that it's not a 100% success rate, that's all

[jackzod]

Did you have to tweak the voltage to get it to work ? and how well did it o/c ?
I'm looking forward to give it a try if there is a decent chance that it will work (I'll upgrade my Mobo if it doesn,t work, but would like to keep it if possible).

Do anyone of you know a site where i could get info on that ?

thanks

[Hugh G Recshun]

I had to down the voltage to 1.8, it is a 500E in a slotket from AZZO, overclocks fine at 667 (133fsb)

[Hugh G Recshun]

Hi Jackzod,

I found this surfing today, and thought you and others may be interested:

P3 coppermine on ABit BH6 r1.02

Hugh G.

[Maniac]

If you use a slocket and a P3 500E, where do you set the voltage and FSB? On the slocket or in the softmenu? And if you set either on the slocket, can you over-ride those settings in the bios?? Thx...

------------------
Celeron 300A@464 2.0V, 128meg generic PC-100 RAM (running at CAS2) Abit BH6, G400 16meg DH@150/200, Western Digital Expert 18gig, Ricoh mp7040A(morphed to mp7060A) Pioneer 6X DVD slot load, Motorola Cable Modem w/DEC ethernet card, Soundblaster Live Value Ver. 2, Viewsonic GT 775

[Hugh G Recshun]

In the BIOS, under CPU plug and play.

Hugh G.

[jackzod]

Inyteresting article indeed Thanks