I need your help once again! Monitor problem this time!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SteveC
    Super MURCer
    • Aug 1999
    • 3540

    #1

    I need your help once again! Monitor problem this time!

    Got a photo of any connections it has?

    ------------------
    Cheers,
    Steve

    "Life is what we make of it, yet most of us just fake"
  • NocturnDragon
    MURCer
    • Aug 2000
    • 110

    #2
    Here i took a couple of pic with my webcam the quality is not that good but it's the best i can do so quickly.

    www.dragone.net/sun2.jpg
    www.dragone.net/sun3.jpg

    ------------------
    NocturnDragon

    Comment

    • FrankDC
      MURCer
      • Oct 2000
      • 139

      #3
      Do a Google search for 'sun 19" mono', there's a lot of info out there.

      Here's a start:
      365-1014 SUN 19" MONO MONITOR,DB9,240,1152x900,61.8KHz,66Hz

      CRT Elston DM60-19A0-09-A104 (or could be Philips CRT, see links below).




      Comment

      • NocturnDragon
        MURCer
        • Aug 2000
        • 110

        #4
        I need your help once again! Monitor problem this time!

        I have recently found a old 20' or maybe 21' (Yeah don't laugh i'm not really sure about that) monitor. On the front there is the
        CROSFIELD logo but on the back there is this:

        Don't use it seems a waste to me so i was wondering if by any chance i can find information about the refresh rate / resolution it supports and the configuration of the input cable. If yes where? I didn't find anything on the sun site nor on search engines...



        [This message has been edited by nocturn_dragon (edited 20 April 2001).]
        NocturnDragon

        Comment

        • NocturnDragon
          MURCer
          • Aug 2000
          • 110

          #5
          Thank you FrankDC!
          With another search i found this:
          Sun Monitor, 20 Inch Mono
          Number : 365-1014-01 Model : M
          9 pin D-sub connector at the back

          Now i have to find the configuration of a 9 pin D-sub connector to make a cable to connect it.
          NocturnDragon

          Comment

          • FrankDC
            MURCer
            • Oct 2000
            • 139

            #6
            It should be the same as the pinouts shown at the second URL above:

            Pin 1 - ECL Video
            Pin 2 - No connection
            Pin 3 - Horizontal sync
            Pin 4 - Vertical sync
            Pin 5 - No connection
            Pin 6 - ECL Video
            Pin 7 - Video Shield
            Pin 8 - Horizontal Sync Return
            Pin 9 - Outer Shield Chassis

            Comment

            • NocturnDragon
              MURCer
              • Aug 2000
              • 110

              #7
              OK going to try something!
              Thank you again!

              This Forum is the best ever!!!!!!
              NocturnDragon

              Comment

              Working...