Recently my Win2K dead prior to faulty mobo. I then replaced with new and different brand mobo. Anyway to autodetect all the new hardware setting and get it start up? Need help.
Win 2K help
Collapse
X
-
Tags: None
-
try pressing F8 at the boot menu and selecting safe mode. remove hardware dependant software(drivers) and motherboard resources in device manager...then reboot normally and see what happens!!!
good luck
cc
-
Well, I been trying to log in for safe mode for many times but the system halt halfway and i assumed it won't boot. Any experienced it would boot for an hour or more?
Comment
-
If it won't run in safe mode you are likely experiencing chipset/controller woes. Not likely you'll get it working without a reinstall. Sorry.
- Gurm
P.S. You can install over itself though. Less work (although a bit messier).
------------------
Listen up, you primitive screwheads! See this? This is my BOOMSTICK! Etc. etc.The Internet - where men are men, women are men, and teenage girls are FBI agents!
I'm the least you could do
If only life were as easy as you
I'm the least you could do, oh yeah
If only life were as easy as you
I would still get screwed
Comment
Comment