Help with agp x2 issues HAIG or other brains :]

[mathew]

So if I dropped my fsb speed to 133 Mhz and then used agp X2 would that work ?

Please can someone tell me how to manually adjust the agp transfer rate :]

Regards Matt {:O)

[ALBPM]

Just change the AGPCLK/CPUCLK setting:

!!CPU SOFT MENU II!!
********************
CPU Name is.........:
CPU Operating speed.: USER DEFINED
-Ext. Clock(PCI)....: (133 X 1/4)
-Multiplier Factor..: 4.5
-SEL100/66# Signal..: HIGH
-AGPCLK/CPUCLK......: 2/3 <---
-L2 Cache Latency...: 8 or lower
-Speed Error Hold...: DISABLE

CPU Power Supply....: USER DEFINED
-Core Voltage.......:?WHATEVER YOU HAVE IT AT

Paul

[Maggi]

Thanx for popping in Pauly !!!

I started to get a little lost here with my HardBIOS ...

...

Matthew,

just leave it as it is, I promise you won't see that much of a difference. In contrary, if you'd lower your FSB to 133MHz, you'd need a divider of 1/2 to get AGP to 66.6MHz.
Are you sure there is none ?

------------------
Cheerio,
Maggi

Home rig:
Celeron333A @ 500MHz
Asus P2B-S @ 100MHz FSB
2x 128MB CAS2 SDRAM
Matrox G400 @ 150/200MHz core/mem clock
... and some other goodies ...

[mathew]

Hi Maggi

I think you are right I must have "squeezed" about as much as I can now so Ile put away my o\c ing for now and get on with some good old fashioned Fraggin.

BTW HAVE YOU SEEN WHAT 3DFX ARE UP TO !!!!!

I think there on the right track anyway {:O)
www.hardocp.com go have a look see :P

Regards Matt
p.s. thanks for the help

[Maggi]

It was about time for 3dfx to wake up, wasn't it ?

But seeing is beleiving and touching is knowing ...

I'll comment on that card when it's out ...

------------------
Cheerio,
Maggi

Home rig:
Celeron333A @ 500MHz
Asus P2B-S @ 100MHz FSB
2x 128MB CAS2 SDRAM
Matrox G400 @ 150/200MHz core/mem clock
... and some other goodies ...