No VGA output upon boot with G400
No video until entering Win 98???
Any suggestions?
G400 Marvel
Tried it on my Abit BH-6 and MSI 6163 mobos, same on both.
???
Any suggestions?
G400 Marvel
Tried it on my Abit BH-6 and MSI 6163 mobos, same on both.
???
-
- Mark
Core 2 Duo E6400 o/c 3.2GHz - Asus P5B Deluxe - 2048MB Corsair Twinx 6400C4 - ATI AIW X1900 - Seagate 7200.10 SATA 320GB primary - Western Digital SE16 SATA 320GB secondary - Samsung SATA Lightscribe DVD/CDRW- Midiland 4100 Speakers - Presonus Firepod - Dell FP2001 20" LCD - Windows XP Home -
Looks like dead BIOS. More info at my website (address in profile). Also, you may want to start with the new Matrox BIOS recovery utility available from Matrox. -
Have you changed the TV output setting of your Matrox bios? If you set it to DOS TV out, it sends a different frequency to the monitor under bootup (50hz or 60hx depending on TV system). You might get a blank screen because the monitor is unable to handle such a low frequency (esp 50hz). It could also be the bios, because in both cases, Windows takes over from the bios upon bootup. Try rewriting the bios from under windows. The progs to do this can be found on both this and the Matrox site.
------------------
What do you want a signature for?Comment
Comment