Good test to see if my max can do 89mhz agp?

[The PIT]

You can't really test as far as I know. You should be able run at 89mhz many poeple do here altough you may to force agp x1.

[cjolley]

Michel,
Could be. The BX6 is getting pretty long in the tooth by now.
Also, there is a big difference between 89mz and 100mz.
My max is a very early one (no 4x), but it handles a 95mz bus.
Do you have a friend with a newer mb you could test it out on?
Good Luck
chuck

[Michel]

Just tested 4.5 x 83mhz with agp 1/1 and that worked ok, so i think 89 mhz will work. 100 mhz with agp 1/1 was just to much i think.

thanx.
Michel

[Michel]

Good test to see if my max can do 89mhz agp?

Hi,
how can i test if my max is capable of doing 89mhz agp? I currently have a cel300@450 on an Abit BX6.
I tried to set the agp divider to 1/1 (making it 100 mhz) but that didn't work (black screen during boot). Does this mean my max also can't do 89mhz? If that is true that means i can't buy a shiney new high clocked PIII .

Could it be that my current mobo doesn't like this setting? Is there another way to test this? I must say my max also can't run agp2 stable on my current setup.

Michel

------------------
Cel300a@450..AbitBX6..128mb..G400max..Promise U66pci..8.4gb + 20gb Maxtor..Diamond MX300..36xcdrom..6x32AopenDVD..Plextor 8x4x32IDE rewriter..3com pci ethernetcard