DVD module Help me...

[choruses]

I have a g200 pci and a DVD module...

It worked well on win98se.

But DVD module didn't work after I added

g400 as secondary vga.

Can DVD module use with other vga ?

[J1NG]

Are you sure you've made the G400 as the secondary adapter and not the primary?

Check your BIOS and see if there is a function that puts the AGP port adapter in preference to other slot adapters. If so, turn it off and try again.

If it doesn't work, post again with more details.

J1NG

[choruses]

I set g400 as a secondary vga.

Bios is set to pci first.

g200 pci's irq: 11
g400 agp's irq: 10

[J1NG]

OK,

Have you installed any other DVD player? (For example, have you installed the G400's software DVD player?)

Have you checked that the DVD module itself is not loose from the connection? (Give it a nudge, as it may be loose and not being detected)

What driver's are you using? Certain drivers do not support the DVD module, so you need to upgrade (or degrade) your drivers as nessecary.

J1NG

[choruses]

I only installed OEM zoran DVD player.

Connection is perfect.

No ploblem occured when I used my g200 and dvd module without g400.

After g400 is added, It isn't work anymore.
( DVD module don't work.. )

When I put off the g400, DVD module works.

[choruses]

The driver is 5.55.022

[Brent]

5.55 is only for module attached to RRG with VT 1.54.
5.52 is right for module and G200-also gives support for new MGI 3.63 SoftDVD.
Module and G400 will not work-I guess that in a dual card system this is going to be a problem. Maybe the G400 takes "priority" even though it is second boot card

[choruses]

I changed my driver to 5.52.

But The same problem occurs.

Could somebody use DVD module in this configuration?