Overclocking G400 MAX to 414ppl 165/207

[Cyberdude]

Did it work SVS[RUS]SU-37??
If it did tell me how you put the fan at the back please.

[SVS[RUS]SU-37]

Hi there CyberDude!

I got new fan, and I put it on the back of my G400M.

How I done it:
I took medical plaster (sticky "paper", maybe it can be called that way) I cut 4 pieces I put them on 4 memory blocks and I put my fan on it. I just had few mins to test it. My Quake-2 runed 15 mins w/o broken image. I ll test today for more time. Right now my G400M overclocked to 165/207.

Only problem as I think can be it thats I put this plaster on memory blocks... so now memory can overheat... duno

One thing, dont think that I am Russian and because of that I used this "wierd" way to put fan on the back of G400M.

[Cyberdude]

Hi SVS[RUS]SU-37 And thanx for the info.
I'm thinking of a small heatsink at the back of my G400(If I could find one).

And Thanx again!

[DuRaNgO]

one of the problems with a heatsink on the back of the card is the cpu (on P-2 and P-3 boards) is real close and they won't stay very cool, you'll have to also put a fan on the heatsink but pull the air from the chip instead of blowing at it, that way you'll pull air from the side and not the back via the processor
jim

[SVS[RUS]SU-37]

Hi DuRaNgO!
I tryed this method, but I got only 1 hour quake-play, afterwards image crashes. I done another thing, I put fan on G400M on the back, with wind rushing in to the G400M chip, and I putted another bigger fan (7.5cm) blowing wind to the back of the comp box.
After all this I got about 2-3 hours of quake play. Very good, with G400M now my record in Quake-2, in internet, in 30min (server limit) I got 207frags (416fph)!

------------------
SVS RUSSIAN

[Cyberdude]

Cool!!! Thank you very much for your info!!

------------------
Windows are made of glass. If you push to hard they'll break.

Windows cannot detect a keyboard press F4 to continue or F2 to abort!.

YOUR MOUSE CURSOR HAS MOVED, PLEASE RESTART FOR THE CHANGES TO TAKE EFFECT.



[This message has been edited by Cyberdude (edited 08 February 2000).]

[SVS[RUS]SU-37]

CyberDude what are you talking about ???
I didnt followed you...

[Cyberdude]

You mean about the small heatsink??
Forget about that

If you mean something else just say so

[SVS[RUS]SU-37]

No I mean that post about that WINDOWS cannot detect F4, F2 keys...

[Cyberdude]

it's a joke.

Do I really make that bad jokes???
Cyberdude

[SVS[RUS]SU-37]

lol no CyBeRdUdE!
Well this maybe wasnt very good joke.. or maybe I just didnt understand it right

[Cyberdude]

Thanx anyway for understanding or trying to understand

CyberD

[SVS[RUS]SU-37]

Its ok CyBeR-D!

Look this topic has grown to 27 replys... very good.

Hey and thnx for memory settings in MGA tweak, course I tryed recomendated settings that were with MGA Tweak proggey, and they worked bad I had glitches.

Thanks C-DuDe!

[CrazyBee]

Hmm.. I have my Vanilla at 162/216:

Fo=324
GCLK divider: 2.00
MCLK divider: 1.50
WCLK divider: 2.00
Duty Cycle Correction: 0,11,0
SDRAM Opti: 3,3,4,9,4,1,Fast,1,1,1,0.0,0.0,1921

I tried 0.2 for the 2nd and 3rd to last parms but I was getting lines everywhere..

CB


------------------
Abit BX6 Rev.1
Celeron 366A PPGA @ 566, 2.1v
192 meg RAM, CAS2
13.0 gig Maxtor 4320 HD
6.0 gig Maxtor (in removeable drive bay)
HP8110i 4x2x24
Pioneer DVD-104
SB Live! 1024
USB ZIP 100
G400 32MB DH 5ns RAM
Two KDS 17" Trinitron monitors

[Cyberdude]

Use these mem-settings:

3.1.3.9.3.1.fast.1.1.1.0,2.0,2.1985

Good luck!!