How to install Parhelia drivers in Linux

[UtwigMU]

Please bear with me, I'm booting Linux for 4th time now (previously LiveCDs and other boxen).

So far running binary installer outputs error:

========================================
   Matrox Linux Driver Install Script
========================================

Currently installed driver is the same as the installer file.
X server driver not installed.

Messages are being logged in file make.log,
this might take some time.

Also I can't find make.log.

I need your help.

[UtwigMU]

OK, the manual says:

- Note for SuSE 9.2 users will need to run the following two commands as root before using
  the matrox installer :

  make cloneconfig
  make modules_prepare

However when I execute the two

linux:~/Drivers # make cloneconfig
make: *** No rule to make target `cloneconfig'.  Stop.
linux:~/Drivers # make modules_prepare
make: *** No rule to make target `modules_prepare'.  Stop.

I get errors.

[UtwigMU]

OK: needed to have kernel source installed and execute SuSE specific commands there.

Driver has been compiled,

Now X-server won't start with Vesa, which probably means I need xorg.conf config file. Samples should supposedly be somewhere as per readme, but where. Matrox forums being down for weekends is really helpful.

[UtwigMU]

OK I have finally found the damn Matrox fora back online and saw that i needed to extract the damn driver in order to acces the damn samples. (README - see samples - but where are the samples.).

I have the driver installed. When I want to change resolution/refres the X fails to start, but it works 1024x768 @ 60hz. Oh well, time for some more config editing.

[UtwigMU]

OK everything is just dandy, enemy territory runs with similar FPS as in Windows.

Transparency (KDE 3.4 - novelty) works but then OpenGL doesn't work (Linux thing - for all cards). It's also a bit sluggish.