Announcement

Collapse
No announcement yet.

Quake 3 benches

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Quake 3 benches

    Quake 3 benches with my old P3-500 then o/c'd to 620:

    All tests were done with:
    Geometry set to: medium
    texture set to: 3/4
    filtering set to: bi-linear

    rez------500@16/16-620@16/16-500@32/32-620@32/32

    800x600------59.5--------71.9--------56.0--------61.2
    1024x768-----56.1--------60.8--------38.9--------39.1
    1600x1200----28.6--------29.2--------15.1--------15.5

    jim



    ------------------
    P3-700e with an MC-1000 @ agiga! Check it here!
    Abit BE6-2
    TwinMos 256mb pc-133
    Matrox......(wouldn't you like to know )
    Maxtor 40gb 7,200 ATA100
    SB Live!
    Toshiba 12x DVD
    Iomega 650cd burner
    Winblows 98se & DX8
    384k DSL
    and 19"'s of beautiful 32bit color!
    System 1:
    AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
    Epox 8K7A
    2x256mb Micron pc-2100 DDR
    an AGP port all warmed up and ready to be stuffed full of Parhelia II+
    SBLIVE 5.1
    Maxtor 40g 7,200 @ ATA-100
    IBM 40GB 7,200 @ ATA-100
    Pinnacle DV Plus firewire
    3Com Hardware Modem
    Teac 20/10/40 burner
    Antec 350w power supply in a Colorcase 303usb Stainless

    New system: Under development
    Tags: None
  • #2
    MidTower Case w/ 300W PSU (Ordering New Case/PSU very soon)
    2XP3-700E@933 133Mhz bus X 7 1/4
    Abit VP6
    4X128m=512M PC-150 Mushkin Rev3 @HCLK+PCICLK
    Hercules 3D Prophet 2 GTS 64M 220C/360M Bios v3.15.00.12
    PCI2/SoundBlaster Live! X-Gamer (Going to be 5.1)
    PCI3/Hauppauge WinTV Theatre (Took out too little power)
    PCI4/Creative Dxr3 Decoder (Going to be a H+)
    PCI5/NetGear FA310TX (Took out too little power)
    PMIDE1/Pioneer 16X Slot DVD-105F
    SMIDE2/Ricoh MP7040A@7060A CDRW (Soon to be Plextor 12/10/32A)
    Floppy 3.5"
    PMIDE3/Maxtor 27.2G DMA/66 92732U8 (Going to be IBM 3X45G Soon. Thinking about SCSI)
    Windows 2000 Professional
    Nvidia 7.17 Drivers
    Directx 8
    Via 4.27 AGP & INF (NO BUSMASTER!!!)


    QUAKE 3 v1.17
    Demo001

    q3config.cfg deleted. ONLY changed resolution on start of Quake 3.

    Before WPCredit

    R_SMP0/1

    320X240 =124.3/147.7
    400X300 =123.2/146.9
    512X384 =123.8/146.0
    640X480 =121.9/135.6
    800X600 =118.0/119.5
    1024X768= 99.3/ 87.8

    After WPCredit

    320X240 =125.9/149.6
    400X300 =126.5/149.6
    512X384 =126.2/148.1
    640X480 =124.5/142.7
    800X600 =120.1/123.5
    1024X768= 99.9/ 87.9

    Cpuidle does NOT work with Quake 3 in SMP. Interesting.....
    C:\DOS
    C:\DOS\RUN
    \RUN\DOS\RUN

    Comment

    • #3
      Dosfreak.

      If you change your drivers to 6.xx you will get a whole lot of more fps. The 7.xx aren´t even beta. Just a piece of advice.

      Comment

      Previous template Next
      Working...
      X