This may not get very much of a response with all of the Parhelia excitement (or dissappointment as as the case may be), but I was trying to benchmark my G400 Max to see if my setup is running properly. Here is my system:
P3 933 Mhz
Asus P3V4X MB (Via Apollo Pro 133A chipset), VIA 4-in-1 v. 4.32
256 Mb Generic PC133 RAM (2-128 Mb sticks, Cas3)
Maxtor 15 Gb 5400 RPM hard drive
Matrox G400 Max (drivers=6.82)
Windows 98SE, DirectX 8
In the advanced display settings for the G400 Max, I set it to use the 32-bit z-buffer for 32-bit colors (I think that was the setting I changed).
Here are the benchmarks:
Quake 3 Test 1.11, Demo001 (all details maxed except I used bilinear filtering instead of trilinear filtering):
640x480x16 = 94.6 fps
640x480x32 = 67.4 fps
800x600x16 = 67.9 fps
800x600x32 = 46.5 fps
1024x768x16 = 43.9 fps
1024x768x32 = 29.0 fps
1280x1024x16 = 27.4 fps
1280x1024x32 = 17.1 fps
1600x1200x16 = 19.1 fps
1600x1200x32 = 11.0 fps
3DMark 2000 (defaults except for the resolution and color depth changes):
640x480x16 = 4950
640x480x32 = 4575
800x600x16 = 4410
800x600x32 = 3688
1024x768x16 = 3377
1024x768x32 = 2461
I know that the VIA AGP interface on my MB is not the greatest. I have seen other benchmarks (on AnandTech) that showed the G400 Max with the TurboGL drivers getting 80 fps at 800x600x16 on a 600 MHz P3 (I'm only getting 68 fps at this resolution and color depth). Is my VIA chipset that bad, or is there a better set of G400 drivers for my setup?
P3 933 Mhz
Asus P3V4X MB (Via Apollo Pro 133A chipset), VIA 4-in-1 v. 4.32
256 Mb Generic PC133 RAM (2-128 Mb sticks, Cas3)
Maxtor 15 Gb 5400 RPM hard drive
Matrox G400 Max (drivers=6.82)
Windows 98SE, DirectX 8
In the advanced display settings for the G400 Max, I set it to use the 32-bit z-buffer for 32-bit colors (I think that was the setting I changed).
Here are the benchmarks:
Quake 3 Test 1.11, Demo001 (all details maxed except I used bilinear filtering instead of trilinear filtering):
640x480x16 = 94.6 fps
640x480x32 = 67.4 fps
800x600x16 = 67.9 fps
800x600x32 = 46.5 fps
1024x768x16 = 43.9 fps
1024x768x32 = 29.0 fps
1280x1024x16 = 27.4 fps
1280x1024x32 = 17.1 fps
1600x1200x16 = 19.1 fps
1600x1200x32 = 11.0 fps
3DMark 2000 (defaults except for the resolution and color depth changes):
640x480x16 = 4950
640x480x32 = 4575
800x600x16 = 4410
800x600x32 = 3688
1024x768x16 = 3377
1024x768x32 = 2461
I know that the VIA AGP interface on my MB is not the greatest. I have seen other benchmarks (on AnandTech) that showed the G400 Max with the TurboGL drivers getting 80 fps at 800x600x16 on a 600 MHz P3 (I'm only getting 68 fps at this resolution and color depth). Is my VIA chipset that bad, or is there a better set of G400 drivers for my setup?
Comment