NEW trailer up at spincycle.n3.net

[cjyo~]

I've put up a new trailer for my short film, spin cycle, at http://spincycle.n3.net. Please take a look.

It should also hopefully be up in the AVI Showcase soon.

I've used my MarvelG200 throughout all stages of the film. I shot 16mm film and cut on a Film Composer and Pro Tools to finish the project on film. I've been using the Marvel for rough cuts,sound tweaking and screen captures. The final video tape version will be Marvel output with mattes, subtitles and sound sweetening in Premiere.

Questions and comments are welcome.

------------------
Please visit http://spincycle.n3.net - My System: Celeron 300a(@450/2v),ABit BH6, 128mb ram, Win98, Marvel G200TV, Diamond MX300, IBM 8.4gb UDMA Deskstar system drive, Adaptec 2940UW SCSI, 2x 9gb Seagate Barracuda UWSCSI video drives, Hitachi GD-2500 DVD-Rom, UltraPlex CD-Rom, Plexwriter CD-recorder, Viewsonic PT775, Soundworks 4.1 speakers

[stevenscott]

Just to let you know that I did go and look. Looks good, though I did not hear sound, maybe my sound was set too low? In any case, someday you can let us see the finished product. Take care.

------------------
Home:
Server:
I run a Matrox Marvel G400 AGP with an:
Abit BE6 MotherBoard
Win98
Adaptec CD Creator 4
Pentium III 450
128 MB Ram
SB Live
Maxtor 13 GIG HD
2 3com Nic cards
Wingate 3.05
1 Symbios SCSI for my HP Photo Scanner
Boca 56K Int. Modem
Mitsumi 4801-TE CD-R
MS Precision Pro Joystick
Surfboard SB1200 cable modem
Shamrock 17" Monitor
HP OfficeJet Pro 1175Cse 4/1 printer/Scanner/Fax/copier
Note: I have the Matrox Mystique G200 16MB AGP Video Card, stashed away,
That I took out and replaced with the Marvel G400 on 10/13/99.
-------------------
Client1:
AbitBX6 MB
Win98
Celeron 300a
Maxtor 6.4 GIG HD
128 MB Ram
Netsurf NIC
SB Live sound card
Teac CDRom
Hercules Thriller AGP Video Card
Boca 56K Int. Modem
MS Precision Pro Joystick
Shamrock 15" monitor
----------------

[cjyo~]

Thanks!

Sorry about the sound, I guess you may need Quicktime 4 to hear the sound. The video is compatible with QT3, but I tested it on a QT3 machine and didn't hear sound either. Maybe it's a new sound codec (Qsound2, I think).

I'll try to put up an .asf file soon, with mp3 sound (which sounds great).

------------------
Please visit http://spincycle.n3.net - My System: Celeron 300a(@450/2v),ABit BH6, 128mb ram, Win98, Marvel G200TV, Diamond MX300, IBM 8.4gb UDMA Deskstar system drive, Adaptec 2940UW SCSI, 2x 9gb Seagate Barracuda UWSCSI video drives, Hitachi GD-2500 DVD-Rom, UltraPlex CD-Rom, Plexwriter CD-recorder, Viewsonic PT775, Soundworks 4.1 speakers

[cjyo~]

I put up a much higher quality .asf version of the spin cycle trailer at http://spincycle.n3.net. The sound problem with the quicktime version should also be fixed now.

Regards,

cjyo

------------------
Please visit http://spincycle.n3.net - My System: Celeron 300a(@450/2v),ABit BH6, 128mb ram, Win98, Marvel G200TV, Diamond MX300, IBM 8.4gb UDMA Deskstar system drive, Adaptec 2940UW SCSI, 2x 9gb Seagate Barracuda UWSCSI video drives, Hitachi GD-2500 DVD-Rom, UltraPlex CD-Rom, Plexwriter CD-recorder, Viewsonic PT775, Soundworks 4.1 speakers