I've just got hold of a daughter card for my Marvel G200. I wanted this so I could edit movies in MJPEG and transcode the finished product to MPEG2/MPEG1, then using the daughter card output the MPEGS full screen (just like MJPEG). However when I run Zoran SoftDVD the video appears on the monitor but is not output on the TV. Switching to an MJPEG files outputs perfectly. What am I doing wrong? The only way I can get it to display on the TV screen is to set TV-out in powerdesk on. This seams pointless as I could do this without the extra hardware. Please, please help me!!!
Announcement
Collapse
No announcement yet.
Marvel G200 w/ DVD Daughtercard. HELP!
Collapse
X
-
Hi Gary,
Some more questions
Can you see the DVD module listed in the white box in "Display Properties\Information" ?
When you installed the Zoran "Soft"DVD from the DVD module installation CD, did you uninstall the previous one first ?
If you didn't, the shortcuts might still be pointing into the Software solution.
Which version of Powerdesk are you using ?
... Hold on, have you tried it with a DVD, not just some MPEG:s on the HD ?
Pertti
Comment
-
I was using latest powerdesk and video tools but i've just gone back to the origianl drivers to see if that was the problem but I have the same the same outcome.
The dvd module is recognised in powerdesk
4.32.043 and no i haven't tried a DVD as i don't have a DVD drive yet.
It should work with MPEGS and MPEG2 files though, shouldn't it??
Comment
-
Shock news! I've managed to get the thing partially working. MPEG2 now plays back in hardware. The problem was I had the filters from the Lygos MPEG2 player installed, these must have been over-riding the Matrox ones. Now I can play MPEG2 either with Media Player or Zoran SoftDVD. Quality is excellent and its better that a seperate decoder card because I don't have to keep swapping leads around as it all goes through the break-out box.
A problem remains, however. I can't do the same with MPEG1 files. Any ideas??
AMD K63-450
128MB SDRAM
Elite P5-VPA+ Motherboard
Marvel G200 AGP with DVD daughtercard
Windows 98
Graphics BIOS 2.6 - 20
Display Driver 4.11.01.2130
Powerdesk 5.15.0.22
Direct X7
Comment
-
I have a Marvel G200 with module DVD. I have acquired module DVD in order to only see files MPEG1 or MPEG2 from me created, not player DVD. I do not succeed to make to work module DVD. The files they come reproduced without acceleration and therefore they do not come sended to escape TV.
I have tried to unistall Marvel G200 with its driver that soft DVD Zoran with no result. I have tried to create files with LSX 3.0 or DVMPEG, but I do not succeed to see
on escape TV the video. The files from me created in MPEG1 they are in format VCD,
but also these are not looked at on escape TV.
Have written to Matrox Italy and they have
answered to me that the acceleration hardware for MPEG1 is not supported.
What I must make?
My system is
Asus P2B
Celeron 300A
64M
HD 8.4M x software
HD 10G x videoediting
Marvel G200
DVD module serie G
Driver G200 4.33 e 1.21
Comment
-
Hi Gary
About media player being able to output mpeg2 files to tv-out, is there any trick?______________________________
Asus A8N-E
Opteron 146
2x512mb Gkill
Seagate SATA 120 gb
Plextor Premium/LG GSA-4167B
Matrox Parhelia APVe
Echo Mia soundboard
Comment
Comment