I wonder if anyone out there has had the following problem, AND found an answer?
When capturing,(using Matrox PC-VCR)I get a jump in the picture on a left or right pan. I've tried lowering the capture settings, and also trying all the different capture settings available. But to no avail. I'm capturing S-VHS. The default setting for the card is: 1/4 pal (352X288) capturing at 6.9:1 There are not many dropped frames reported after capture; maybe 2 to 8. Any ideas please?
Arthur S.
System:
Win 98 1st edition. 400 P11 CPU. QDI Legend motherboard. 128RAM. Matrox Marvel AGP graphics/capture card.(8meg) 17inch ADI Microscan monitor. SB 128PCI soundcard. Fujitsu 4.5gig system HDD. Fujitsu 10gig HDD for capture. (The only programmes on this drive are Matrox video tools and MS 5.2 VE) Quantum fireball 8gig HDD for rendering the finished video file to. The drives benchmark with the supplied programme at about 3.50 - 6.00 - 8.50 mb/sec respectively. This varies somewhat every time that I run the benchmark programme.
Comment