RR-G question

[Michel Carleer]

Gibverse, the channel which will suffer the most depends obviously on the exact frequency of the channel but also on the frequencies emitted by the PC. Which means it depends on the clock of the PC, it won't be the same for everyone. My own experience was to put the RR-G I had (till last month, now replaced by a G400 Marvel) as far as possible of the CPU and the BX chip. And as an additional way of lowering the interference, to leave the PC open so that the emf would not be reflected back and concealed in the PC by the box itself.

Aryko, I am afraid that if your shielding is not tight closed, it won't work. But then you would have the heat problem. Unless you attach the shield to the chip or it's radiator or, maybe better, between the chip and the radiator.
But I don't have these problems anymore with the Marvel.
Michka.

[mynx]

The only channels I seem to get interference on are 2 & 6. Unfortunatly 6 is FOX for me.

[Aryko]

Mike's right - there isn't an appreciable difference with a layer of aluminium foil. The Marvel concept is the best way to avoid interference problems.

- Aryko