How to change IRQ?

[Jakub]

Here's my IRQ list:

00 System timer
01 Keyboard
02 Programmable interrupt controller
03 Communications Port (COM2)
04 Communications Port (COM1)
05 Creative SB Live! Value
05 IRQ Holder for PCI Steering
06 Standard Floppy Disk Controller
07 Printer Port (LPT1)
08 System CMOS/real time clock
09 Intel 82371AB/EB PCI to USB Universal Host Conroller
09 IRQ Holder for PCI Steering
10 Adaptec AIC-7850 PCI SCSI Controller
10 IRQ Holder for PCI Steering
11 Matrox Marvel G400 AGP - English
11 IRQ Holder for PCI Steering
12 WheelMouse1 (PS/2)
13 Numeric data processor
14 Intel 82371AB/EB PCI Bus Master IDE Controller
14 Primary IDE controller (dual fifo)
15 Intel 82371AB/EB PCI Bus Master IDE Controller
15 Secondary IDE controller (dual fifo)

I see there's something sharing a IRQ with Marvel. Now I want to know how to fix this.

[JTA]

first question : why ?
do you have any problemns with your marvel ?

besides, at first sight your marvel isn't shared with anything other than windows 98 :-)

You can forget the "IRQ Holder for PCI Steering" listed together with your marvel G400 on IRQ11.

[Jakub]

Oh... Some colourfull flashes sometimes, but only when I'm playing my clips from PC-VCR...And some dropped frames [I think because of my videocamera] but no other problems I just wanted to make my system perfect...but I quess it is working as good as it can

[DrMordrid]

As far as potential for causing capture problems go the one thing that glares to me is the SBLive Value.

These things can be bus hogs extraordinare. Make sure you have the very lateset drivers for it. Even then some of the older ones are hopeless.

Otherwise I'll light a candle for you ;-)

Dr. Mordrid

[DrMordrid]

As far as potential for causing capture problems go the one thing that glares to me is the SBLive Value.

These things can be bus hogs extraordinare. Make sure you have the very lateset drivers for it. Even then some of the older ones are hopeless.

Otherwise I'll light a candle for you ;-)

Dr. Mordrid

[Jakub]

It was my videocamera. I had my videocamera in the input channel and now I have my vcr in the input channel and there is no capturing problems anymore. Every time I touched the videocamera a frame dropped...weird And when there was an empty space [milliseconds] between two videorecordings a frame dropped. No problems now