Tweet
Marvel G400 Seamless Playback - please help
Hello from Germany
Hope someone can understand my terrible english and can help me with my problem
I´m a proudly owner of a Marvel G400TV
and i want to collect a little bit
"Music Videos" from MTV or Viva.
Meanwhile i have 3 thousand
)Captureprogramms but not ONE GOOD Multimedia
Player which can playback seamless a playlist
from several videos. I want to watch via the video output from the marvel on my TV.
I have tested Microsoft Multimedia Player
(with a playlist generated from Winamp!!),
FMV (Full Motion) Viewer, Matrox VCR Remote
Playlist Option, Woldos Multimedia Player
and a few others.
I think all work via MCI Interface and
so here my simple programm construction
(Please correct when wrong)
Do
Open a device ´TV Out Switch ON
open a file
Play that file
close a file
close the device. ´TV Out Switch OFF
Loop Until Playlistende
So between every clip the TV Out switched
Off and On and that takes 2-3 seconds.
So long i see a Blue Screen on TV.
(blue or black is equal because TV/VCR dependent)
With AVI Files and MPEG1/2/4 its the same
where AVIs work with DualHead Function
disabled. And the others only work via
TV Out when DualHead is Switched On and
DVD Max Function is ON.
Its a little bit the same when you work
with Adobe Premiere and you have not make
an prem50.ini file with the content
[override]
NoDirectShow=1
[codec]
keepopen=dmb1
Than if you are a little bit to slow while
cutting, the TV switched Off and you must
wait 2-3 seconds until new activated.
I nedd this "keepopen" function while playing
without
this errormessage "Device is still in use by another application"
Thats my first problem. The second i will
post later when some could help me with
the first))
PC=P450 II, 128 MB, W98 FirstEdition
best regards and please help
Rainer Dybowski
Hope someone can understand my terrible english and can help me with my problem
I´m a proudly owner of a Marvel G400TV
and i want to collect a little bit
"Music Videos" from MTV or Viva.
Meanwhile i have 3 thousand
)Captureprogramms but not ONE GOOD MultimediaPlayer which can playback seamless a playlist
from several videos. I want to watch via the video output from the marvel on my TV.
I have tested Microsoft Multimedia Player
(with a playlist generated from Winamp!!),
FMV (Full Motion) Viewer, Matrox VCR Remote
Playlist Option, Woldos Multimedia Player
and a few others.
I think all work via MCI Interface and
so here my simple programm construction
(Please correct when wrong)
Do
Open a device ´TV Out Switch ON
open a file
Play that file
close a file
close the device. ´TV Out Switch OFF
Loop Until Playlistende
So between every clip the TV Out switched
Off and On and that takes 2-3 seconds.
So long i see a Blue Screen on TV.
(blue or black is equal because TV/VCR dependent)
With AVI Files and MPEG1/2/4 its the same
where AVIs work with DualHead Function
disabled. And the others only work via
TV Out when DualHead is Switched On and
DVD Max Function is ON.
Its a little bit the same when you work
with Adobe Premiere and you have not make
an prem50.ini file with the content
[override]
NoDirectShow=1
[codec]
keepopen=dmb1
Than if you are a little bit to slow while
cutting, the TV switched Off and you must
wait 2-3 seconds until new activated.
I nedd this "keepopen" function while playing
without
this errormessage "Device is still in use by another application"
Thats my first problem. The second i will
post later when some could help me with
the first
))PC=P450 II, 128 MB, W98 FirstEdition
best regards and please help
Rainer Dybowski