Tweet
MadOnion Video2000 Benchmarking - I've got issues.
Howdy people...
I've just down a run down of Video2000 testing but i seem to be having some issues. I was wondering if anyone has run this program with a G400MAX, Asus p3v4x MB & P3 fc pga 550e@733(100fsb) or similar spec.
I ran into problems while running the Quality Testing - DVD playback - De Interlacing : Line Flicker test. In this test there a 2 sets of lines, 5 in each. As it plays they flicker(at least on my system) and then it froze. I reset the machine and changed the agp x4 spec tp x2 thinking this was an issue(i was just venturing a guess really). I ran the test again and it did the same thing except i could close the program & go back to my desktop. I read though the help page at MadOnion
and it basically said the test will pass or fail & move on. However the benchmarking did not move on it just stuck.
I'm wondering if any of you gurus have a clue whats going on. Is it my system setup or is it a Matrox grapic hardware/driver problem? Any comments would be helpful guys.
Cheers.
------------------
Aopen HX08 full tower case, Asus P3V4X bios 1.03, P!!! FC-PGA 550e @733, 160M pc100 sdram, Matrox G400MAX bios 1.4 PDesk 5.52.015, Seagate 28.5G Ultra ATA66 7200rpm HD, Pioneer 103s DVD 6X/32X drive, SB AWE64 Gold ISA sound card, SMC pci ethernet adaptor, Castlewood Orb 2.2G media drive, Nortel 100 cable modem, Mitsubishi 1995 19in monitor, occasionally use dualhead for dvd on a Sony 80cm Wega TV, MS natural keyboard, MS Intellimouse Explorer,
Win98SE 4.10.2222A, DX7a.
[This message has been edited by cancer (edited 27 April 2000).]
I've just down a run down of Video2000 testing but i seem to be having some issues. I was wondering if anyone has run this program with a G400MAX, Asus p3v4x MB & P3 fc pga 550e@733(100fsb) or similar spec.
I ran into problems while running the Quality Testing - DVD playback - De Interlacing : Line Flicker test. In this test there a 2 sets of lines, 5 in each. As it plays they flicker(at least on my system) and then it froze. I reset the machine and changed the agp x4 spec tp x2 thinking this was an issue(i was just venturing a guess really). I ran the test again and it did the same thing except i could close the program & go back to my desktop. I read though the help page at MadOnion
and it basically said the test will pass or fail & move on. However the benchmarking did not move on it just stuck.
I'm wondering if any of you gurus have a clue whats going on. Is it my system setup or is it a Matrox grapic hardware/driver problem? Any comments would be helpful guys.
Cheers.
------------------
Aopen HX08 full tower case, Asus P3V4X bios 1.03, P!!! FC-PGA 550e @733, 160M pc100 sdram, Matrox G400MAX bios 1.4 PDesk 5.52.015, Seagate 28.5G Ultra ATA66 7200rpm HD, Pioneer 103s DVD 6X/32X drive, SB AWE64 Gold ISA sound card, SMC pci ethernet adaptor, Castlewood Orb 2.2G media drive, Nortel 100 cable modem, Mitsubishi 1995 19in monitor, occasionally use dualhead for dvd on a Sony 80cm Wega TV, MS natural keyboard, MS Intellimouse Explorer,
Win98SE 4.10.2222A, DX7a.
[This message has been edited by cancer (edited 27 April 2000).]
Comment