Anybody with the same problem ?

[Debbie]

Hi All,

I have a Creative AWE64 with a Matrox Marvel G400-TV.

If I connect both plugs, ie. audio in and audio out from the bob to the sound card I get a sort of feedback sound.

Removing the audio out plug clears the problem.

This will not happen with the SB PCI 128 if the jumpers are set on line.

Any ideas ?

Regards,

Debbie

[Christrati]

I remember having a similar problem with the Marvel G200. I don't remember how I cured it, since that was about 1-2 years ago!

However, I remember doing something with the volume control and what is what using for recording sound. Either in the Sound mixer (Creative) or Windows. BTW, is it a fuzz, or just when you playback sounds? If it is <i>only</i> playback of sounds that sound like feedback or reverbed, then you need to mute your line in portion of your mixer. If you hear some <i>fuzz</i> on bootup on, then it is something with the recording selection.

My guess would be when you playback sounds, which then you need to mute the line in. I would start with muting all the devices (creative mixer, make sure there are no yellow dots under the controls) and only enable or dot WAVE, then try playing a sound. If that works, slowly enable other sound channels such as MIDI, CD-rom, etc. See if that helps.

Chris