If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am not 100%, but I believe that there is a setting in the options that you can save the settings as a default. I imagine that it would be a registry issue. If so, then you could export that string after setting it up for each profile. Personally I would recommend AVI_IO for saving different configs and most here would agree that it is a better capture program than anything else out there, especially for the Marvel cards.
WinXP Pro SP2 ABIT IC7 Intel P4 3.0E 1024M Corsair PC3200 DCDDR ATI AIW x800XT 2 Samsung SV1204H 120G HDs AudioTrak Prodigy 7.1 3Com NIC Cendyne DVR-105 DVD burner LG DVD/CD-RW burner Fortron FSP-300-60ATV PSU Cooled by Zalman Altec Lansing MX-5021
Thanks for your reply. I quite agree AVI_IO is exelent and I use it as my standard capture software.
However when I capture using DivX I am geting a "shadowing" of the first frame superimposed over a part of the captured clip. This usually lasts until a change of scene.
Thaks for your reply. When you go to "Capture AVI", Load and Save processing settings disappear and it appears that there is no where to save Capture settings.
Debbie do you use v 1.3d ??
go to file ,capture avi,
set all yout settings then go to capture heading,
preference then check the appropriate boxes
I think will reset the defaults
smitty
Comment