Tweet
G450 eTV Video Tools Problem
Hardware Configuration:
- Intel Pentium4 2.6C (800MHz FSB w/ HyperThreading)
- Abit IC7-G (Intel i875p [Canterwood] chipset)
- 512mb Kingston HyperX PC3500 ( 2x256 Dual Channel DDR)
- Matrox G450 eTV
Software Configuration:
- WindowsXP SP1
- Driver version 582
- Video tools version 210a
I have a problem when running the video tools. First off, in order to even run the "Quick Connect" configuration utility, I must lower the desktop color depth to 16-bit. After that, I am able to configure and scan for channels. The channels are detected, and are previwed fine before the configuration gets to "Finish." But afterwards, when trying to actually run PC-VCR, I get an error that says "An unrecoverable error has occured. The application will be terminated."
I have tried lower CPU speed in accordance to the thread located .here : . I also tried disabling HyperThreading. Neither worked to solve the problem. Any help would be appreciated
- Intel Pentium4 2.6C (800MHz FSB w/ HyperThreading)
- Abit IC7-G (Intel i875p [Canterwood] chipset)
- 512mb Kingston HyperX PC3500 ( 2x256 Dual Channel DDR)
- Matrox G450 eTV
Software Configuration:
- WindowsXP SP1
- Driver version 582
- Video tools version 210a
I have a problem when running the video tools. First off, in order to even run the "Quick Connect" configuration utility, I must lower the desktop color depth to 16-bit. After that, I am able to configure and scan for channels. The channels are detected, and are previwed fine before the configuration gets to "Finish." But afterwards, when trying to actually run PC-VCR, I get an error that says "An unrecoverable error has occured. The application will be terminated."
I have tried lower CPU speed in accordance to the thread located .here : . I also tried disabling HyperThreading. Neither worked to solve the problem. Any help would be appreciated
I like my Matrox card and I don't want to throw it away.
Comment