I have two capture systems set up, one using my old Marvel G200 Card and the other using a Marvel G400 card (see specs below). I'm using PD 5.41 and VT 1.52 on both, as well as DX 9.0b.
Here's the puzzle: I've never been able to capture at 704x480x30 at better than 11/1 compression, 1.930 MB/sec. Now, all of a sudden I notice that the G200 system is giving me the option of 704x480x30 at 6/1 compression and 3.0 MB/sec.
I'm going nuts trying to figure out what's different between the two systems that would account for this.
system 1:
AMD TBird 1200
128 MB PC100
Abit KT7A
Marvel G200, BIOS V. 3.3 (I can't find BIOS v. 3.3 for download ANYWHERE!)
TBSC
17 GB Maxtor system drive
30 GB Maxtor capture drive
System 2:
AMD Athlon 2000+
512 MB DDRRAM
MSI 745 Ultra
Marvel G400, BIOS v. 2.1.35
TBSC
30 GB Maxtor System Drive
80 GB Maxtor Capture drive
I don't have PIC or Morgan codecs installed, although system 2 does have a Divx player. Both systems have Premiere 6.0, although I almost never use it on system 1.
What else can I look for, mainly to enable the higher capture settings on the G400? Or does the difference between the BIOS's account for it?
Kevin
Here's the puzzle: I've never been able to capture at 704x480x30 at better than 11/1 compression, 1.930 MB/sec. Now, all of a sudden I notice that the G200 system is giving me the option of 704x480x30 at 6/1 compression and 3.0 MB/sec.
I'm going nuts trying to figure out what's different between the two systems that would account for this.
system 1:
AMD TBird 1200
128 MB PC100
Abit KT7A
Marvel G200, BIOS V. 3.3 (I can't find BIOS v. 3.3 for download ANYWHERE!)
TBSC
17 GB Maxtor system drive
30 GB Maxtor capture drive
System 2:
AMD Athlon 2000+
512 MB DDRRAM
MSI 745 Ultra
Marvel G400, BIOS v. 2.1.35
TBSC
30 GB Maxtor System Drive
80 GB Maxtor Capture drive
I don't have PIC or Morgan codecs installed, although system 2 does have a Divx player. Both systems have Premiere 6.0, although I almost never use it on system 1.
What else can I look for, mainly to enable the higher capture settings on the G400? Or does the difference between the BIOS's account for it?
Kevin
Comment