If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
So my 2400+ isnt O/Cing as well as i hoped so im aiming for another one i was looking at the 2500+ coz i have heard som amazing O/cz about it !!
but which one will overclock good??
Lian Li PC71 Mods UnderWay!
Radeon 9800 Pro 450Core / 375 Mem With Original Cooling just memsinks added
512mb HyperX Dual Channel 400MHz Ram
Modding is my life allways was my life and i intend it to be my life
Yup my Barton 2500+ is at 3200+ speeds (FSB from 333 to 400). Be aware that the multiplier is locked on all new bartons for quite a while now - and there is no unlocking it.
But 11x is good at 333 and 400 like I said so no probs really...
Have they also made it that modding the motherboard no longer works? I shorted the pins on the back of my MB, and it worked just as well as if I'd fiddled with the CPU.
Gigabyte P35-DS3L with a Q6600, 2GB Kingston HyperX (after *3* bad pairs of Crucial Ballistix 1066), Galaxy 8800GT 512MB, SB X-Fi, some drives, and a Dell 2005fpw. Running WinXP.
Lian Li PC71 Mods UnderWay!
Radeon 9800 Pro 450Core / 375 Mem With Original Cooling just memsinks added
512mb HyperX Dual Channel 400MHz Ram
Modding is my life allways was my life and i intend it to be my life
Gigabyte P35-DS3L with a Q6600, 2GB Kingston HyperX (after *3* bad pairs of Crucial Ballistix 1066), Galaxy 8800GT 512MB, SB X-Fi, some drives, and a Dell 2005fpw. Running WinXP.
Comment