Announcement

Collapse
No announcement yet.

Suggested Socket 939 Motherboard...

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    Suggested Socket 939 Motherboard...

    So I may be upgrading my motherboard, processor and ram soon. Going with the AMD Athlon 64, socket 939. The question is, what motherboard/chipsets are good? This is the first PC I'm going to build that is non-Intel... I always stuck with Intel, because I've always heard of (and had problems with) other people's computers with different chipsets. From what I could see, Asus only has one socket 939 motherboard, the A8V. It uses the Via K8T800 Chipset. Is this good, or should I go with the nforce3 250gb chipset (I didn't see an Asus motherboard with that.) I generally buy Asus boards, because I like their features and they are very stable.

    Any suggestions? I'll be putting an Athlon 64 3000+ (90nm) CPU in it. Of course, I suppose the real question is, how much faster will this be than my 3.06ghz Pentium 4 (with 533mhz FSB)?

    Leech
    Wah! Wah!

    In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship.
    Tags: None
  • #2
    Believe it or not I've heard good things about the K8T800 chipset. And the Asus Athlon boards have been quite good. Oddly enough I also found that Soyo made some good boards for Athlon in their Dragon Platinum series.

    Comment

    • #3
      It'll probably be a few weeks before I order everything for this. Thanks for the input. I've read that the 90nm Athlon 64's can be overclocked up to 45%! So I'll be needing a monster heat sink probably too... but that'll wait 'til the mainboard is picked out...

      Leech
      Wah! Wah!

      In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship.

      Comment

      • #4
        What are you going to do with your old 3.06? I may be interested for the right price...
        Q9450 + TRUE, G.Skill 2x2GB DDR2, GTX 560, ASUS X48, 1TB WD Black, Windows 7 64-bit, LG M2762D-PM 27" + 17" LG 1752TX, Corsair HX620, Antec P182, Logitech G5 (Blue)
        Laptop: MSI Wind - Black

        Comment

        • #5
          More than likely, it's being sold to someone I work with.... along with the motherboard, ram and the Thermalright heatsink I put on it... I had to replace the stock Intel heatsink because the fan was whining all the time...

          Leech
          Wah! Wah!

          In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship.

          Comment

          • #6
            Oh, remember to get some good low latency memory for your Athlon. They perform better with lower latency versus cranking the bus speed up.

            Comment

            • #7
              Any 939 boards come with 4 pin fan headers? For auto adjusting the fan speed on cpu proportional to temperature?
              ______________________________
              Nothing is impossible, some things are just unlikely.

              Comment

              • #8
                I thought (assumed) that was done by varying the power voltage?
                Blah blah blah nick blah blah confusion, blah blah blah blah frog.

                Comment

                • #9
                  Just been reading the server mainboards review off

                  www.tomshardware.com .

                  And the 4 pin headers seem like a cool thing to have. To control inlet / exhaust fan and cpu cooler, automatically.

                  As especially if it can be tied in with amd's cool n quiet.
                  ______________________________
                  Nothing is impossible, some things are just unlikely.

                  Comment

                  • #10
                    Whether you like it or not, the nVidia nForce boards are considered the best chipset for AMD mobo's. The new ATi chipset has been getting a lot of praise lately, but the nForce4 is generally considered better.

                    The problem with that is, of course, the nForce4 is brand spanking new, which means hard to come by (only Asus and MSI will boards out this year) and you'll need to drop the extra cash on PCIe video card(s).

                    My current favorite mobo maker for "overall component choice and quality" is Giga Byte. They use some really good parts on their mobos, like real TI IEEE 1394b chips and the like. Their nForce3 boards are also very very nice. The nForce3 Ultra chipset still has a dedicated CSA-style bus for Gb ethernet, as to not take bus speed away from PCI, and sports standard AGP/PCI for lower cost add-ons.

                    My $0.02.

                    Jammrock
                    “Inside every sane person there’s a madman struggling to get out”
                    –The Light Fantastic, Terry Pratchett

                    Comment

                    • #11
                      Originally posted by rylan
                      Oh, remember to get some good low latency memory for your Athlon. They perform better with lower latency versus cranking the bus speed up.
                      I was going to order some Corsair XMS RAM. http://www.newegg.com/app/viewproduc...145-450&DEPA=1

                      Leech
                      Wah! Wah!

                      In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship.

                      Comment

                      • #12
                        Originally posted by Jammrock
                        Whether you like it or not, the nVidia nForce boards are considered the best chipset for AMD mobo's. The new ATi chipset has been getting a lot of praise lately, but the nForce4 is generally considered better.

                        The problem with that is, of course, the nForce4 is brand spanking new, which means hard to come by (only Asus and MSI will boards out this year) and you'll need to drop the extra cash on PCIe video card(s).

                        My current favorite mobo maker for "overall component choice and quality" is Giga Byte. They use some really good parts on their mobos, like real TI IEEE 1394b chips and the like. Their nForce3 boards are also very very nice. The nForce3 Ultra chipset still has a dedicated CSA-style bus for Gb ethernet, as to not take bus speed away from PCI, and sports standard AGP/PCI for lower cost add-ons.

                        My $0.02.

                        Jammrock
                        That's what I really wanted, was an nforce board. But Asus only had the A8V motherboard. Generally I stick with Asus, I'll check out Gigabyte.

                        Leech
                        Wah! Wah!

                        In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship.

                        Comment

                        • #13
                          Yeah, Corsair is real good stuff, and the stuff you picked out would probably be good; that one is 2-3-3-6 $212.25 -
                          the 2-2-2-5 stuff is $247.25 but you arent gonna see any big performance difference.
                          That ASUS A8V Deluxe is a real good board too.
                          Q9450 + TRUE, G.Skill 2x2GB DDR2, GTX 560, ASUS X48, 1TB WD Black, Windows 7 64-bit, LG M2762D-PM 27" + 17" LG 1752TX, Corsair HX620, Antec P182, Logitech G5 (Blue)
                          Laptop: MSI Wind - Black

                          Comment

                          • #14
                            For a board have a look at the MSI K8N Neo2 Platinum and for memory Crucial's Ballastix is hard to beat

                            http://msicomputer.co.uk/products.aspx?product_id=703505&cat_id=77


                            DRAM, Solid State Drive (SSD) & Memory Upgrades
                            http://www.crucial.com/uk/ballistix/store/listmodule.asp
                            Find compatible DRAM memory and SSD upgrades for your PC or Laptop with our Crucial Advisor tool or Crucial System Scanner, with FREE US delivery!
                            When you own your own business you only have to work half a day. You can do anything you want with the other twelve hours.

                            Comment

                            • #15
                              Crucial is generally more compatible with A64 boards in various RAM configs, giving better performance (mainly when running 2 or more DIMMs).

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X