Troubleshooting help required. AGP P650

[cboy69]

Here's what I have done
put P650 into Gigabyte GA-7ZXR motherboard.
Set the AGP voltage to 1.5v.
Plugged in lcd to the DVI port of card.


The motherboard has memory and a processor.
But no signal is sent to the DVI. and the PC eventually does a double beep, followed by a pause then single beep.

Any further ideas?

[Fat Tone]

Check which BIOS your mobo uses, then search for PC POST codes to see what that pattern means. My guess is it's probably a memory error, so check that first.

[Gurm]

The solution to this problem is simple.

1. Get a static bag. Put the card in the static bag.

2. Get a cardboard box. Put the card/bag into the box.

3. Seal the box. Put my address on it.

4. Take it to the post office. Send the box to me.

That is all. This will completely solve your problem!

[schmosef]

LOL! Still on the hunt for Matrox card of your very own, eh?

[Gurm]

Yeah kinda. Not desperate enough to PAY for one - have you seen what those things go for on eBay?