I have a problem setting up my Intel P2-266 CPU (Boxed Version) on the P3B-F M/B. When using the JumperFree mode the CPU selection does NOT allow me to choose the Bus Frequency Multiple(it stays gray-shaded) and it defaults to 3.5x.
The problem is that the external frequency at 66MHz * 3.5x frequency multiple gives me only 233MHz and the problem is that I am using a P2-266Mhz.
Although when using DIP swiches I can select the 4.0x frequency multiple which gives me the 266MHz.
So is there a way I can get 266MHz in jumperfree mode or can actually choose the frequency multiple in the BIOS.
Spec.
Intel P2-266
Asus P3B-F rev.1.03
BIOS rev. 1003A
The problem is that the external frequency at 66MHz * 3.5x frequency multiple gives me only 233MHz and the problem is that I am using a P2-266Mhz.
Although when using DIP swiches I can select the 4.0x frequency multiple which gives me the 266MHz.
So is there a way I can get 266MHz in jumperfree mode or can actually choose the frequency multiple in the BIOS.
Spec.
Intel P2-266
Asus P3B-F rev.1.03
BIOS rev. 1003A
Comment