Announcement

Collapse
No announcement yet.

High Quality Athlon Coolers.

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    High Quality Athlon Coolers.

    Now that I have a working Athlon system in a well cooled case I want to install a good high quality Athlon heatsink/fan so I can overclock the hell out of my Athlon.

    Any suggestions and instructions would be helpful.

    Jammrock

    ------------------
    Athlon 650, Biostar board, 128 MB PC133 (Crucial), G400 32 MB DH, SB Live! w/ Digital I/O, 10/100 NIC, lots of case fans, etc...
    “Inside every sane person there’s a madman struggling to get out”
    –The Light Fantastic, Terry Pratchett
    Tags: None
  • #2
    Jammrock,

    Found this at Anandtech yesterday. Hope it helps.

    http://www.anandtech.com/showdoc.html?i=1178

    Dave
    Ladies and gentlemen, take my advice, pull down your pants and slide on the ice.

    Comment

    • #3
      The GlobalWin FKK50 is an excellent HS/Fan unit. (I am using two of these on my systems below).

      ------------------
      System 1:
      Microstar K7Pro (MS-6195) Motherboard
      AMD Athlon 550 @ 900MHz
      256MB PC-100 CAS2 SDRAM
      Matrox Millennium G400 DualHead Max
      Matrox Rainbow Runner G-Series
      Creative Soundblaster Live! Player 1024
      Promise FastTak66 RAID Controller
      2 x 13.5GB IBM ATA/66 HDD's
      Panasonic SR-8584 6x DVD-ROM
      Yamaha CRW8424 IDE CDR/RW
      Panasonic SuperDisk LS-120
      Netgear FA310TX 100m/bit PCI NIC

      System 2:
      Microstar MS-6167 Motherboard
      AMD Athlon 500 @ 750MHz
      128MB Crucial PC-133 SDRAM
      Matrox Millennium G400 DualHead
      Creative Soundblaster Live! Value
      22GB IBM ATA/66 HDD
      Hitachi GD-2500 4x DVD-ROM
      Linksys LNE100TX 100m/bit PCI NIC




      [This message has been edited by RoGuE (edited 22 February 2000).]

      Comment

      • #4
        Just Reviewed the new GlobalWin VOS32. Very nice unit indead...

        Comment

        • #5
          Bit of a beast isn't it

          Comment

          • #6
            Alpha P7125



            Guyver
            Gaming Rig.

            - Gigabyte GA-7N400-Pro
            - AMD Athlon 3200+ XP
            - 1.5GB Dual Channel DDR 433Mhz SDRAM
            - 6.1 Digital Audio
            - Gigabit Lan (Linksys 1032)
            - 4 x 120GB SATA Drives, RAID 0+1 (Striped/Mirrored)
            - Sony DRU-500A DVD/+/-/R/RW
            - Creative 8x DVD-ROM
            - LS120 IDE Floppy
            - Zip 100 IDE
            - PNY Ultra 5900 (256MB)
            - NEC FE950
            - DTT2500 Cambridge Soundworks

            Comment

            • #7
              Tell me what do you think of the Cooler master DP2-5g53?

              I have a generic dual fan extrusion molded Heatsink with nice specs - but i think the enclosed casing for the HS would do me alot better.
              Since i have a huge case fan blowing directly onto the heatsink from above - this causes the airflow in an open heatsink to be turbulant - and we do not want that do we!

              well give your posts - i'll be running a 650@748
              You all may think this is not important.
              BUT IT IS AMATTER OF LIFE AND DEATH!

              Comment

              • #8
                Any suggestions on where I can buy one of these beasties?

                Jammrock
                “Inside every sane person there’s a madman struggling to get out”
                –The Light Fantastic, Terry Pratchett

                Comment

                Previous template Next
                Working...
                X