Announcement

Collapse
No announcement yet.

PIII 700 Coppermine @ ?mhz

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    PIII 700 Coppermine @ ?mhz

    Greetings.

    Are there any Murcers out there with this chip, and if so, any joy in overclocking it? I've just ordered one and i'm hoping to kick it in at 1008mhz. Pipe dream or possibility?

    Cheers,

    Giskard

    Tags: None
  • #2
    Check the SL#'s on your new processor. If it has the cBO stepping there is a very good chance of getting in the upper 900's and even possibly a "GIG".

    For slot1 - SL454 Retail, SL453 OEM
    For FCPGA - Sl45Y Retail, SL3XX OEM

    Here's the link for the Intel Page
    http://support.intel.com/support/pro.../sspec/p3p.htm

    Paul
    "Never interfere with the enemy when he is in the process of destroying himself"

    Comment

    • #3
      I just recently got one, which is a cbo stepping, and it will do 933 with the stock heatsink, but any higher will eventually give me errors running prime95. I'm suspicious of my ram though... have another stick on order to see if it is. Maybe it'll be here today! I'll post back if anything different.

      Comment

      • #4
        Current system is a PIII500E @720MHz(144fsb), with stock cooling, so i'm pretty confident in the system as a whole. I just hope that i dont have jump through hoops to get the 700E to work it's magic.

        G

        Comment

        • #5
          very good chip!
          jim


          ------------------
          P3-700e @ 1052! Check it here!
          Abit BE6-2
          TwinMos 128mb pc-133
          Matrox Fusion Plus F800 AGP
          Maxtor 15.3gb 7,200rpm
          SB Live!
          Winblows 98se & DX7
          and 384k DSL!
          System 1:
          AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
          Epox 8K7A
          2x256mb Micron pc-2100 DDR
          an AGP port all warmed up and ready to be stuffed full of Parhelia II+
          SBLIVE 5.1
          Maxtor 40g 7,200 @ ATA-100
          IBM 40GB 7,200 @ ATA-100
          Pinnacle DV Plus firewire
          3Com Hardware Modem
          Teac 20/10/40 burner
          Antec 350w power supply in a Colorcase 303usb Stainless

          New system: Under development

          Comment

          • #6
            Mines happy on stock cooling at 933 with 133 SDRAM. Any faster and I start getting errors after a while, I expect I could push it farther with better cooling and increasing the core V.
            Unfortunately I'm stuck with 100mhz RAM for now

            ------------------
            P3-700E, Abit BF6, G400 MAX, 8.6 gig Seagate, 8.6 gig WD, SBLive 1024, 256Mb PC100... Mouse, Keyb, Stuff

            Comment

            • #7
              Cool bananas!! Did you use standard cooling to reach that speed DuRaNgO?
              G

              Comment

              • #8
                nope, put this baby on it


                it's the BIG one

                go HERE to check see it
                jim
                System 1:
                AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
                Epox 8K7A
                2x256mb Micron pc-2100 DDR
                an AGP port all warmed up and ready to be stuffed full of Parhelia II+
                SBLIVE 5.1
                Maxtor 40g 7,200 @ ATA-100
                IBM 40GB 7,200 @ ATA-100
                Pinnacle DV Plus firewire
                3Com Hardware Modem
                Teac 20/10/40 burner
                Antec 350w power supply in a Colorcase 303usb Stainless

                New system: Under development

                Comment

                • #9
                  check see it
                  hehe
                  System 1:
                  AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
                  Epox 8K7A
                  2x256mb Micron pc-2100 DDR
                  an AGP port all warmed up and ready to be stuffed full of Parhelia II+
                  SBLIVE 5.1
                  Maxtor 40g 7,200 @ ATA-100
                  IBM 40GB 7,200 @ ATA-100
                  Pinnacle DV Plus firewire
                  3Com Hardware Modem
                  Teac 20/10/40 burner
                  Antec 350w power supply in a Colorcase 303usb Stainless

                  New system: Under development

                  Comment

                  • #10
                    DuRaNgO, I was on the phone talking to Gabe two days ago and he's thinking about selling nothing but watercooled systems!
                    "Be who you are and say what you feel, because those who mind don't matter, and those who matter don't mind." -- Dr. Seuss

                    "Always do good. It will gratify some and astonish the rest." ~Mark Twain

                    Comment

                    • #11
                      heh, I was just thinking about my next project using his setup (water)
                      Looks like a great kit

                      Too bad 'bout the rest,they're very easy to use
                      jim
                      System 1:
                      AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
                      Epox 8K7A
                      2x256mb Micron pc-2100 DDR
                      an AGP port all warmed up and ready to be stuffed full of Parhelia II+
                      SBLIVE 5.1
                      Maxtor 40g 7,200 @ ATA-100
                      IBM 40GB 7,200 @ ATA-100
                      Pinnacle DV Plus firewire
                      3Com Hardware Modem
                      Teac 20/10/40 burner
                      Antec 350w power supply in a Colorcase 303usb Stainless

                      New system: Under development

                      Comment

                      • #12
                        You guys are maniacs
                        Do you have to warn the power grid before you turn the machine on

                        G

                        Comment

                        • #13
                          No but we have tell the local airport when our machines are taking off with all the extra fans in them.
                          Chief Lemon Buyer no more Linux sucks but not as much
                          Weather nut and sad git.

                          My Weather Page

                          Comment

                          • #14
                            Update:

                            Got the chip yesterday. Currently running @ 933mhz Retail h/s and fan. BX chipset, 28 deg c. CPU, 36 deg c under full load (seti crunching among other things) and 24 deg c when idle. Ambient temp around 24 deg c.

                            Was hoping for 1008mhz, but i'm not really too worried. It's not like i'm getting aggressive with cooling or anything.

                            Cheers,

                            Giskard

                            Comment

                            • #15
                              What MB, memory, adapters?
                              <TABLE BGCOLOR=Red><TR><TD><Font-weight="+1"><font COLOR=Black>The world just changed, Sep. 11, 2001</font></Font-weight></TR></TD></TABLE>

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X