Tweet
Radius GDM-1950 & G400 MAX
Does any one know how to make the Radius GDM-1950 and G400 MAx "Talk" under WIN98se with a VGA - 5BNC cable?
------------------
--Jon Wiswell II
------------------
--Jon Wiswell II
-
--Jon Wiswell II -
DDC only talks through TTL type cables."Be who you are and say what you feel, because those who mind don't matter, and those who matter don't mind." -- Dr. Seuss
"Always do good. It will gratify some and astonish the rest." ~Mark Twain -
Could you clarrify the term DDC and what you mean by a TTL cable please?
------------------
--Jon Wiswell II--Jon Wiswell IIComment
-
VESA DDC
(VESA Display Data Channel) A VESA standard communications channel between the display adapter and monitor. The DDC is used to pass Extended Display Identification Data (EDID), which is stored in the monitor and describes its characteristics (vendor name, serial number, frequency range, etc.).
DDC requires an additional wire in the cable. The first level implementation (DDC1) provides a unidirectional channel that lets the monitor inform the host of its abilities. A second bi-directional level (DDC2) allows the host to adjust the monitor.
For example, the monitor's switch settings could be put into a software control panel.
TTL cable (ie VGA cable) is the standard type used to output to your monitor. It has a sub D15 connector (vs BNC type with 5)."Be who you are and say what you feel, because those who mind don't matter, and those who matter don't mind." -- Dr. Seuss
"Always do good. It will gratify some and astonish the rest." ~Mark TwainComment
-
OK. That makes sense. So I'll re-phrase my inquiry. Does anyone know how to make these two pieces of hardware work together?
------------------
--Jon Wiswell II--Jon Wiswell IIComment
-
Comment