Dip Switch setings on old abit bx MOBO!

[Guru]

Whats the right seting for an celeron 400MHz runing @ 400/66MHz!

The mobo is an old abit bx (OEM only ver.)!

It has the same dip switch system as all newer abi mobos has but no soft menu!

[dZeus]

are you sure it's an Abit board? afaik Abit never produced dispswitch boards after their first SoftBios board (LX6 ?)

[Guru]

Abit still has dipswitches on all it's mobos! Just take a look!

[Guru]

Now that you mention it the socketA and some bx mobos did not have the switches!

It's an BX you won't find it on abits home page (well the bios update is on their ftp site but thats about it)! It's an OEM only relese! The seting should be the same as on the BE6-II!

[dZeus]

no they don't

at least I don't have any dipswitches (Abit BX6 r.2)

[Kruzin]

My "old" BH6 also has no DIP switches.
What is the model# of the mobo?
Have you checked Abit's site? They have manuals available for d/l

http://www.abit.com.tw/english/

[The PIT]

Allmy KT7a doesn't but my bf6 does so lets say some have the switches. Whats the model number??

[The PIT]

Guru why are you answering your own questions and how come your number of posts haven't gone up while you're doing it.

[Guru]

I'm just showing you all available manuals for abit mobos that I have found and the one for the bx20 mobo is not there!

[Guru]

No it was not the same as on the be6-2 I got the multiplier right but not the fsb that was detected as 100MHz and not 66MHz!

[Guru]

The mobo is an "Abit BX20"!

[Guru]

Here is the list of available manuals http://ftp2.abit.com.tw/download/man...sh/index-e.htm

And the bios update I found by looking at this page http://www.ping.be/bios/index.html?h.../numbers.shtml

Here is another page http://driver.am.nthu.edu.tw/vendor/ABIT/manual/ but still no luck!

[This message has been edited by Guru (edited 05 June 2001).]