Announcement

Collapse
No announcement yet.

w2k and Soyo 7vba133 = no go

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    w2k and Soyo 7vba133 = no go

    Hello there,
    just tried to upgrade w98se to w2k professional on a system with the following:

    Soyo 7vba 133 mobo
    celery II 633mhz
    Fujitsu 40gb hdd
    128mb pc-133
    and have tried several vid cards
    that's it!

    While installing, w2k starts to search for plug and pray stuff then halfways through, it jumps to a blue screen that says:
    "system halted, see your hardware vender"

    Does anyone know of something in particular?
    TIA, jim
    System 1:
    AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
    Epox 8K7A
    2x256mb Micron pc-2100 DDR
    an AGP port all warmed up and ready to be stuffed full of Parhelia II+
    SBLIVE 5.1
    Maxtor 40g 7,200 @ ATA-100
    IBM 40GB 7,200 @ ATA-100
    Pinnacle DV Plus firewire
    3Com Hardware Modem
    Teac 20/10/40 burner
    Antec 350w power supply in a Colorcase 303usb Stainless

    New system: Under development
    Tags: None
  • #2
    Never mind, found it!

    "This behaviour occurs when the "Soundblaster Legacy option" is set to enabled. Since Win2000 and WinME do not need to have legacy support, you should heep it to disabled. "
    System 1:
    AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
    Epox 8K7A
    2x256mb Micron pc-2100 DDR
    an AGP port all warmed up and ready to be stuffed full of Parhelia II+
    SBLIVE 5.1
    Maxtor 40g 7,200 @ ATA-100
    IBM 40GB 7,200 @ ATA-100
    Pinnacle DV Plus firewire
    3Com Hardware Modem
    Teac 20/10/40 burner
    Antec 350w power supply in a Colorcase 303usb Stainless

    New system: Under development

    Comment

    Previous template Next
    Working...
    X