G200 with PD5 on SS7

[diatribe]

I'm running a G200 on an Epox motherboard with K6-2@400MHz. After installing PD5 PCIList now reports AGPx2, before it was AGPx1. First question: how do I tell if the g200 is running in DIME or DMA-mode? In final reality I now get a higher AGP-benchmark. Second question: why has the bus transfer rate dropped by 20% in Final Reality?

[Markus Selchow]

Either PowerStrip or PCI-List from www.entechtaiwan.com report the use AGP mode ...

------------------
Cheers,
Maggi

Asus P2B-S @ 112MHz FSB * Celeron300A @ 504MHz
Heavily boosted by the Millenium G400 32MB SGRAM DualHead