Cooling my G400 ( Warning ! - shown with pictures ! )

[U2]

Nur die G400 Max muesste mal aus dem Matrox Onlinestore ankommen! Ich warte nun schon seit anfangs Juni auf die liebe Karte. Es hat halt nicht jeder die Moeglichkeit schon eine zu bekommen.

Gruesse aus der Schweiz!

[Maggi]

Grüetzi

Ich drücke Dir beide Daumen, daß sie bei Dir ist, wenn ich aus dem Urlaub zurück bin !

------------------
Cheers,
Maggi

Asus P2B-S @ 112MHz FSB - Bios 1009 final
Celeron300A @ 504Mhz
128MB 7ns SDRAM
G400 DualHead 32MB SGRAM @ 201 MHz memory clock

I'll be on holiday for the coming three weeks and I miss you folks already ;-)

[ALBPM]

Hallo Jeder,

Es ist eine kleine Welt. Ich wohnte in Vaihingen für fünf Jahre, das nahes Stuttgart
ist.

Paul

[Helmchen2000]

Klar hab ich die gelesen und noch viele mehr,
of course, I've read them and much more

ich dachte nur, vielleicht gibts außerdem noch was zu sagen.
I thought there is perhaps something more to tell about.

Naja eigentlich gabs ja bei Matrox nie viel zu sagen!
But there's nothing to tell about with Matrox till now.

------------------

Das mit den 7m hat auch seine Nachteile, da kommt es dann schon mal vor, daß sich der weg vom Schlafplatz zum Arbeitsplatz auf das anheben des Kopfes beschränkt!
The 7m have their disadvantages too. Sometimes I only need to raise my head to come from my sleeping place to my working place.

------------
LOL - kenn ich/I know
ROFL - kenn ich/I know
aber/but
DUDROFLOL !!! - ????????????

----------
Dear Buuri
I will translate my messages in some minutes!

Helmchen

[Maggi]

Ist es nicht schön hier ?
Isn't it just beautiful over here ?

DUDROFLOL - Dropping Under my Desk, Rolling On the Floor, Laughing Out Loudly



------------------
Cheers,
Maggi

Asus P2B-S @ 112MHz FSB - Bios 1009 final
Celeron300A @ 504Mhz
128MB 7ns SDRAM
G400 DualHead 32MB SGRAM @ 201 MHz memory clock

I'll be on holiday for the coming three weeks and I miss you folks already ;-)

[Jutai]

Did you screw both fans using the two holes already in the board for the fan(MAX)? You could put two bolts, one through each hole and screw in the fans quit securely. I believe the holes are on the other models too... Now that i look again it looks like you only used 1 screw on the large fan.

------------------
Chris K.

[Maggi]

Hi Chris,

no screws at all

------------------
Cheers,
Maggi

Asus P2B-S @ 112MHz FSB - Bios 1009 final
Celeron300A @ 504Mhz
128MB 7ns SDRAM
G400 DualHead 32MB SGRAM @ 201 MHz memory clock

I'll be on holiday for the coming three weeks and I miss you folks already ;-)

[Helmchen2000]

Ah so wie es mir ging als ich las Altavista babbels
ah the way it happened to me when I read Altavista babbels(German slang for talking)

Helmchen

[Helmchen2000]

Why not mounting a heatsink with fan or even a peltier element which would be real active cooling.

Helmchen

[acobra]

Maggi,

Are you using the "feature connectors" in some way??

[ALBPM]

Maggi, don't tell us that you used velcro, please don't....LOL

Paul

[Paradox]

Tape? or HardOCP's "Frag Tape"

------------------
----------------
Pentium II 350mhz (@412 4*103) 256PC100 Ram, 8.4gig WD, Millenium G200 8MB @ 118 MOC(Soon to be regular 32mb G400 =), Diamond MX300

[Maggi]

No peltiers in my rig ... I'm scared of possible condensing water.

No feature connector used ...

What's velcro ?

No tape ...

this is getting funny

------------------
Cheers,
Maggi

Asus P2B-S @ 112MHz FSB - Bios 1009 final
Celeron300A @ 504Mhz
128MB 7ns SDRAM
G400 DualHead 32MB SGRAM @ 201 MHz memory clock

I'll be on holiday for the coming three weeks and I miss you folks already ;-)

[Buuri]

You glued them.

B

[Guyver]

Mr Selchow,

I'm thinking that you may have used some of those fancy little plastic zip-strips used to tie off cables to make your case nice and neat....

Hmm, or maybee Buuri's right - glue - but then what if you need to remove them? Nah - glue would be to harsh....



[This message has been edited by Guyver (edited 07-23-99).]