Tweet
4.51 drivers work ok, after upgrading to 5.13
windows '98 hangs during bootup (bootlog.txt)
comes until g200 driver. I already installed everything clean. Motherboard pc100 M729 from
pcchips. Latest bios motherboard / 2.6 TV????? g200 8MB SGRAM (got no tv output but what the heck). ALI m1621 AGP ALI M1533 (agp 1.6 version), latest 3.40 ide drivers. direct x 6.1. Tried almost everything. Can't find the registry setting for turning off busmastering.
Hope someone can help i'm getting nuts.
Here's some extra info from some utils:
Matrox video BIOS data dump v0.55, GBM 01/99
Cards found:
# Loc Chip type
0 0100 MGA G200 AGP rev.01
BIOS: checksum OK, version 2.6, file name:900-26
VENDOR_ID = 102b -> Matrox Graphics Inc.
DEVICE_ID = 0521 -> MGA G200 AGP
SUBSYS_VID = 102b -> Matrox Graphics Inc.
SUBSYS_ID = ff03 -> Card model: Millenium G200 AGP
--- Press <Enter> to continue ---
PINS at 7ac0; checksum OK.
00: Signature : .A
02: Size : 64
04: PINS Version: 3.0
06: Last pgm date : 1999-08-04
08: Programmed : 8 times
10: id : 11 60
12: S/N : GAJ95181
28: Card version: 207A
34: PCB version : 798-0
48: Mem control : 042450a1
54: Memory type?: SGRAM
56: Base memory : 8 MB
RAMDAC speed: 250 MHz
8bpp 16bpp 24bpp 32bpp
Max PCLK: 250 250 232 176 MHz
Max Vsync freq.
800 x 600 378 378 350 266 Hz
1024 x 768 224 224 208 158 Hz
1152 x 864 175 175 162 123 Hz
1280 x 1024 134 134 125 95 Hz
1600 x 1200 92 92 85 65 Hz
OPTION byte at 4b6d, value: 44
Signon message display disabled.
Current memory size (active BIOS only): 8 MB
G200CLK Matrox MGA-G200 Optimizer Version 0.20 Beta Release 1999(C) Copyright Matrox MGA Optimization Tools All Rights Reserved. May 12, 1999.
Chipsets : Matrox MGA-G200 AGP
MGA Control Aperture : DFEFC000h
Mapped Linear Address : CBA50000h
System PLL Parameters : M = 2, N = 19, P = 0, S = 3
System PLL Clock (Fo) : 180.00 MHz
Clock Dividers : GCLK = Fo/2.0 (90.00 MHz)
MCLK = Fo/1.5 (120.00 MHz)
WCLK = Fo/2.0 (90.00 MHz)
Memory refresh counter : 19 (1217 MCLK period)
Main memory 128MB, network card installed rtl8029, videocard (videocap).
Phoei, i hope i've supplied enough info.
A tired but still believing in matrox dutch customer.
windows '98 hangs during bootup (bootlog.txt)
comes until g200 driver. I already installed everything clean. Motherboard pc100 M729 from
pcchips. Latest bios motherboard / 2.6 TV????? g200 8MB SGRAM (got no tv output but what the heck). ALI m1621 AGP ALI M1533 (agp 1.6 version), latest 3.40 ide drivers. direct x 6.1. Tried almost everything. Can't find the registry setting for turning off busmastering.
Hope someone can help i'm getting nuts.
Here's some extra info from some utils:
Matrox video BIOS data dump v0.55, GBM 01/99
Cards found:
# Loc Chip type
0 0100 MGA G200 AGP rev.01
BIOS: checksum OK, version 2.6, file name:900-26
VENDOR_ID = 102b -> Matrox Graphics Inc.
DEVICE_ID = 0521 -> MGA G200 AGP
SUBSYS_VID = 102b -> Matrox Graphics Inc.
SUBSYS_ID = ff03 -> Card model: Millenium G200 AGP
--- Press <Enter> to continue ---
PINS at 7ac0; checksum OK.
00: Signature : .A
02: Size : 64
04: PINS Version: 3.0
06: Last pgm date : 1999-08-04
08: Programmed : 8 times
10: id : 11 60
12: S/N : GAJ95181
28: Card version: 207A
34: PCB version : 798-0
48: Mem control : 042450a1
54: Memory type?: SGRAM
56: Base memory : 8 MB
RAMDAC speed: 250 MHz
8bpp 16bpp 24bpp 32bpp
Max PCLK: 250 250 232 176 MHz
Max Vsync freq.
800 x 600 378 378 350 266 Hz
1024 x 768 224 224 208 158 Hz
1152 x 864 175 175 162 123 Hz
1280 x 1024 134 134 125 95 Hz
1600 x 1200 92 92 85 65 Hz
OPTION byte at 4b6d, value: 44
Signon message display disabled.
Current memory size (active BIOS only): 8 MB
G200CLK Matrox MGA-G200 Optimizer Version 0.20 Beta Release 1999(C) Copyright Matrox MGA Optimization Tools All Rights Reserved. May 12, 1999.
Chipsets : Matrox MGA-G200 AGP
MGA Control Aperture : DFEFC000h
Mapped Linear Address : CBA50000h
System PLL Parameters : M = 2, N = 19, P = 0, S = 3
System PLL Clock (Fo) : 180.00 MHz
Clock Dividers : GCLK = Fo/2.0 (90.00 MHz)
MCLK = Fo/1.5 (120.00 MHz)
WCLK = Fo/2.0 (90.00 MHz)
Memory refresh counter : 19 (1217 MCLK period)
Main memory 128MB, network card installed rtl8029, videocard (videocap).
Phoei, i hope i've supplied enough info.
A tired but still believing in matrox dutch customer.