How to overclock my G400?

[LokTo]

I know this question has been asked a lot, but I simply couldn't find the old posts which talked about it. Anyone knows which program can overclock my G400? Thanks a lot.

[Mike H]

I would like to know if I can O/C it by changing pin 31 in the bios like the G-200.

------------------
Mike H.

Watercooled AMD K6-3 450 @ 500 (100*5) Epox EP-MVP3G Rev. 1.0 Bios 7-16-99 128 Meg PC100 Matrox Marvel G-200 TV 16MB 5.15 Drivers SB Live! Full Retail Western Digital Caviar AC313000RTL

[SupeBoy]

You can use the utility called "Performance Tuner", it's great and easy to use. I think you can get it at MURCs download, else I have a link for it in the news section of my page mentioned below.

Remember to put a fan on if you clock it high (many post have said that a memoryclock of 205 MHz was possible).

Torben

------------------
Looking for G400 news, info, benches, downloads and tons more. Check out "http://trsdomain.homepage.dk"

[Kruzin_K]

Performance Tuner is a derivative of Powerstrip. I highly recommend not using either of these utilities, as they have been eating G400 BIOSs. At the very least, make an emergency BIOS disk before using them.

If you go to the MGA tools site on murc, you can find g200clk (which is what most people are using), or you can sign up on Liews beta bot MGATweak.

[LokTo]

Thanks SupeBoy and Kruzin! I've got the G200CLK, but I don't know how to use it, can u give me an example? Say I want the core to run at 145 and memory at 180, what should I type?

[rickT]

g200clk /1 290

[LokTo]

Thank you very much!