G4Set with MAX...

[JamesA]

Folks,

After looking at tombman's post, I was wondering whether my MAX was affected when I briefly ran PowerStrip to read the memory and graphics clock (but without using its overclocking stuff).

Here is the output..

<tt>Matrox G400 chip control utility v0.10, GBM 06/99
For Matrox beta testers only!!! Contact gbm@ii.pw.edu.pl to report errors.
I seriously doubt if this will work :-).
Run "G4SET -?" for usage options.
----------------------------------------
Cards found:
# Loc Chip type
0 0100 G400 AGP (Toucan) rev.03
----------------------------------------
----------------------------------------
PLLs n m p freq
HiRes PClk: 34 2 1 157.500 MHz
SClk: 66 5 0 301.500 MHz
G:d c f M:d c f W:d c f
1/2 n/a 150 2/3 8.0 201 1/2 n/a 150
----------------------------------------
AGP data rate: 2x, pipeline depth: 32,
AGP transactions enabled, sideband addressing enabled.</tt>

Anybody know if this is OK?

The desktop is running at 1280x1024x32bit @ 85Hz.

JamesA.


------------------
System Hardware:
www.cis.ohio-state.edu/~ang/demerzel.html

[ Edited to make it darn sure that fixed width font is used across all browser for G4Set's output. ]

[This message has been edited by JamesA (edited 08-09-99).]

[Kruzin_K]

Those numbers are as they should be.

[JamesA]

Thanks Kruzin.

JamesA.


------------------
System Hardware:
www.cis.ohio-state.edu/~ang/demerzel.html

[tombman]

James , what cpu do you have ?

[JamesA]

tombman,

Uhh.. I am a lazy fart, so my system spec is in my sig. Click on the URL, and you will be transported to my system's hw page.

Of course, to save you time, I can tell you now that all I've got is an O/C Celeron 300A. Not the fancy stuff you got.

Me poor and have a wife to take care of. Not rich single guy like you.

JamesA.