I am borrowing a friend's G200 as a replacement for my V330 pci card until I can order a MAX. It works great except for two things: Its only in 1x transfer mode, and Vsync is on. I've tried the registry hack patches from the download section for powerdesk 5.x (Force AGP2x transfers, Vsync off), but it is still in 1x and Vsync=on.
I know these questions were addressed a while ago, but I don't remember which threads so I thought I'd ask again.
I've gotten 2x agp to work on my mobo with other cards, so I know it will do it.
My setup is as follows: Epox MVP3G-M rev 1.0 SS7, K6-3 450 o/c to 466, 256MB pc-133, SBLive, Maxtor DiamondMax+ 10.2gb (actually will run at 41Mhz pci bus!), Pioneer 6x dvd, Tv tuner card, modem. I have all of the recent mobo patches and drivers from VIAtech web site, and the current bios. Any suggestions?
Also, what is the registry key to manually change the vsync and agp speed etc so I can check if it is actually getting modified? Thanks
I know these questions were addressed a while ago, but I don't remember which threads so I thought I'd ask again.
I've gotten 2x agp to work on my mobo with other cards, so I know it will do it.
My setup is as follows: Epox MVP3G-M rev 1.0 SS7, K6-3 450 o/c to 466, 256MB pc-133, SBLive, Maxtor DiamondMax+ 10.2gb (actually will run at 41Mhz pci bus!), Pioneer 6x dvd, Tv tuner card, modem. I have all of the recent mobo patches and drivers from VIAtech web site, and the current bios. Any suggestions?
Also, what is the registry key to manually change the vsync and agp speed etc so I can check if it is actually getting modified? Thanks
Comment