Tweet
When I use the Tv out with a G200 Mystique, The TV Screen is not full. There are 1 cm black near the picture. Sorry for my English I'm French !!! THANK YOU
-
-
Is there an option for 'overscan'? Overscan would be kind of useless for displaying computer graphics on a screen but if it's DVD or something, I can see your point.
Now you're French so it's probably PAL and i don't know a whole lot about PAL except that it's slower refresh and higher resolution.
Try a few different resolutions, too. Thing is, the thing -should- have borders because the tv-out really does have to show images of computer screens (your desktop, etc), and you don't want that stuff off the side of the screen. But look for overscan options. I'm sure you'll like it if you find it.
------------------
------------------
Ami Y. Koriuchi - foxyviolet@hotmail.com
Asus P2B 1010 - P3-500
256MB 6NS
70 GB of 10k RPM SCSI UW style.
I sure do like robots.
-----
---
Ami Y. Koriuchi - MY EMAIL IS DEAD
SYSTEM1
Asus K7V266 - Athlon XP 1800+ - GeForce 4 TI 4600 128MB -
1024 MB PC2100 DDR -
200 GB UDMA100 7200 RPM - 60GB LVD 160 10K RPM
SYSTEM2
Asus A7V133 - Athlon 1.4 - G400Max
768MB PC133 - 75 GB of 10k RPM SCSI UW
HI SOMETiMES I GO AWAY FOR LONG TIME AND COME BACK YEARS LATER HI! -
Hello,
I have the same behaviour with my Mystique
G200.
Looking at previous postings resizing should
work with 5.21 Drivers.
... should ... but it was not working in
my case so I contacted Matrox Support and
they replied ...
"This adjustment cannot be changed on the earlier versions of the card
containing the Maven 1 for tv output.
If you are not satisfied with the
card performance the way it is right now,
you can call our technical
support line at 514-685-0270 so that we may RMA you card and get you a
replacement."
Even if I am not happy with my G200 ...
compliments to Matrox Support ... every
request I have made was handled within
24h.
... another question, what is the usual
procedure for replacing my mystique.
Do I get a new G200 or can I upgrade to
to a G400. What will be the extra charge
for the latter one.
Does somebody have any experiences with
Matrox and RMA?
Comment
Comment