Tweet
going to update 5.13 to 5.25 and bios 3.51 to 104. do i need to change mgatweak settings back to default to do this safely?? if so, how is this done? i cant seem to undo the overclocked settings. also is this bios update recommended/necessary? thanx for any help
-
-
remove the shortcut from your windows startup folder and the card will run at default, yes you should update the bios and driver 5.25
good luck
jim
------------------
PII-350mhz @ 450, Abit BH6 mobo, 128mb pc-100, Mill G200 8mb sgram @ 210 with MGATweak) PD 5.25, IBM 8.4 gb hdd, SB Live!, winblows 98se, DX6.1, THREE BIG FANS, four little ones and a case that sounds like a turbine engine...doh!
System 1:
AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
Epox 8K7A
2x256mb Micron pc-2100 DDR
an AGP port all warmed up and ready to be stuffed full of Parhelia II+
SBLIVE 5.1
Maxtor 40g 7,200 @ ATA-100
IBM 40GB 7,200 @ ATA-100
Pinnacle DV Plus firewire
3Com Hardware Modem
Teac 20/10/40 burner
Antec 350w power supply in a Colorcase 303usb Stainless
New system: Under development
Comment