Survey of your G400 AGP Mode

[Javert]

Many peoples said that their G400 card can not run at AGP 2X mode. So I want to have a survey about the G400 AGP Mode. Pls post us :

1. Model of G400
2. Model of MB
3. AGP Mode
4. a little bit info of your computer and setting.

My info :

1. G400 Max
2. Asus P2B ver1.1- bios 1011 - beta 2
3. AGP 1X Mode
4. P3-450, 2940U2W, IBM SCSI hard. DVD Rom, CDR and Runing Win98 with PD 5.3. System running perfectly. Just can not running AGP 2X mode and try all solution and can not fix.

[This message has been edited by Javert (edited 10-11-1999).]

[Rags]

ABit BH6 rev 1.0
G400 SH 16Meg OEM alone on IRQ11
128PC100
P3 450@558
Sportster 56K
SB16
AGP 2X with no hacks, no lockups, no problems

Rags

[Kruzin]

Always got 2x on my G200 without forcing it, and still get 2x on my G400 without forcing it.

------------------
P2-450(112*4.5=504), Asus P2B (1010), 128meg pc100, MillenniumG400 32meg DH (5.??), 3com 3c905b-tx, SB Live!value, Dual USR 56k Sporsters, WB 8.4&6.4 UDMA, CL PC-DVD, Mistumi CD-RW

[SPSUguy]

Hey,

1. Dual head G400 32MB clocked to 150core/ 200mem.

2. Always been AGP 2x. No probs.

3. Using newest MV bios for my BH6.

------------------
Abit BH6, Celeron 450, Matrox G400 32mb "MAX", 256mb ram, IBM 10GB, DVD 5x, MX300

[SCompRacer]

1. G400 MAX
2. ASUS P2B-LS/Rev 1.02/BIOS 1010
3. AGP X 2
4. P III 500 @ 560 via 112FSB
G400/SB Live share IRQ 11.
Bus Mastering Enabled.
Difference between AGP X 1 and X 2 is
improved 32MB texture rendering in 3D
MARK 99 MAX.
Max O/C 110% w/Matrox Tweak before
spotting.
Plays tech demo, Quake II, Forsaken,
Unreal, Expendable.

------------------
P III 500 @ 560 via 112 FSB, ASUS P2B-LS w/1010 BIOS, 256 MB 8ns ECC RAM ECC Enabled since 5.13 driver release, current 5.30 drivers, DX 7, Seagate 9 GB LVD Cheetah & 9 GB UW Barracuda, 10 GB IDE DiamondMax, Plextor Ultraplex 32 X/Plexwriter 8/2/20 RW, Hitachi GD 2000 IDE DVD CD ROM, SCSI ZIP Insider, G400 MAX, SB Live/Liveware 2.1, Sigma Hollywood + DVD decoder, US Robotics 56K Sportster, Sony GDM400PS, UMAX 2400S SCSI scanner, Soundworks 5.1, HP 6P Laser & 890C, SCSI, LAN & USB enabled. SB Live shares IRQ w/MAX, bus mastering enabled, Win98 SE and NT 4.0 SP4.


[This message has been edited by SCompRacer (edited 10-11-1999).]

[Mark F]

1. Model of G400
MAX

2. Model of MB
AOpen AX6BC rev1.3

3. AGP Mode
2X

[Frank]

G400 32Mb DH
Abit BX6rev2
2X AGP
PII333@515/SBlive/256Mb Ram/V2SLI/SMC NIC/56K

[Jessy]

G400
Chaintech 6BTM
AGPx2 with 1024x768x32
PII 400MgH, Win98, PD 5.30
AGPx2 did not work at all with PD 5.25, AGPx2 still does not work for resolutions higher than 1024x768

[box]

G400MAX
Epox MVP3G-M
K6-III 450
256MB Ram

AGP2x all the way

[Chris Blake]

1. G400Max DH
2. Epox mvp3g5
3. AGP x2 (forced but stable)
4. See Sig


------------------
Chris Blake

Epox MVP3G5, K6III450, 192Mb RAM, G400Max DH, SBLive! Value and whole load of other stuff

[TheMorg]

1. G400MAX (5.15, not o/c)
2. Asus K7M
3. AGP x2 (no dirty Registry trickery)
4. See below:

Athlon 600 (often at 650MHz)
256Mb PC100 SDRAM
2940U2W SCSI
18+9Gb SCSI LVD HDD
LG 2x EIDE DVD-ROM (bus-mastering disabled for DVD)
Plextor 8x20 SCSI CD-R
SBLive (Liveware 2.1)
Mitsubishi 900u monitor

Waiting for general consensus on 5.30 before upgrading...

[Scytale]

MAX, BH6 1.01 MV, AGP1X. Seating seems to be a problem factor.

[Ricardo]

AGP 2X without forcing (also with my old G200)
G400 IRQ 9 (alone)
SBLive IRQ5
SB16 emu enabled
USB with IRQ assigned
Bus mastering enabled

No problems.

Regards,
Ricardo


------------------
P3-500, Shuttle 661P, 512Meg HSDRAM,WD Expert 18GB, Segate Medalist 6GB, AOpen 40X CDROM, HP 8100i CD-RW, G400 MAX, SB Live Value, 3Com 10/100 (3C905B-TX) , Sony F400 19"

[Meek]

Running 2x AGP, equipment: see SIG.

Running Windows 98 SE

On Epox MVP3C-M it was AGP1x, although that had to be forced, 2x resulted in crashes.

Zagarus: you seem to be missing the AGP miniport for your motherboard/chipset. Try (re-)installing that. Ot then you have the AGP "seating problem".

M.

------------------
Athlon500/MSI6167/64M(!)/10GIBM/6GSamsung/1GSCSI IBM/AHA2940/CL2xDVD/FastMM2+MJPEG/HPPSScanner/HPPSPrinter/G400DH32M/ZIP100SCSI/Mitsumi2xCD-R/Samsung17GL/MX300/AKA Electric Classic

[DuRaNgO]

AGP 2x from initial installation

no seating problems either
jim

------------------
PIII-500mhz @ 620!
Abit BE6 mobo
128mb pc-100
Mill G400(YAHOO!!!) 32mb @ 120%)
PD 5.30
Maxtor 13.2 gb Uata66 hdd
SB Live!
Winblows 98se
DX7
THREE BIG FANS, six little ones and a case that sounds like a turbine engine...doh!