Major Problems w/ G400 MAX

[cjolley]

Hi Holly!
The PCI modem will take a high IRQ. (even if it's not a winmodem, rags)
But he just has to get his vid card up to the higher ones. The lower ones don't work the same as the high ones.

Huge clouds of midnight-oil fumes seem to be floating around tonight!

chuck


------------------
ABit BH6 w/ Celery 333@500, 128mb gh@cas2, 10gb IBM@7200, SB Live Value@44kh, noname CDRom@40x, Mitsumi CDRW@2x2x8, cheap PCI non winmodem @irq9, Princeton EO75@1024x768x32x85hz, USB mouse,Matrox G400 MAX!!!!




[This message has been edited by cjolley (edited 14 October 1999).]

[Dyre]

Well we can just forget about this problem for awhile at least, cause im picking up a new motherboard(Abit probably) and a PIII 450.

Keep you informed if it works on that system

[Dyre]

Well. Got me a new motherboard and chip and all is well. G400 runs nice. with the new piii 450 life is good.
that old motherboard was the problem. had something wrong with its irq assignment....


Thanx for all the help!!!!!!!!
i love this PLACE

[DuRaNgO]

post your mobo info and we'll tell you how to speed up that p-3 450 hence speeding up the g400
jim

------------------
PIII-500mhz @ 620! with an Abit BE6 mobo
128mb pc-100
Mill G400(YAHOO!!!) 32mb @ 165/205 with MGATweak), PD 5.30 & bios 1.5-22
Maxtor 13.2 gb Uata66 hdd
SB Live!
Winblows 98se & DX7
FOUR BIG FANS, six little ones and a case that sounds like a turbine engine...doh!
3DMark Result 5954.69 3DMarks
Synthetic CPU 3D Speed 9325.69 CPU 3DMarks
Rasterizer Score 2791.72 3DRasterMarks
Game 1 - Race 65.07 FPS
Game 2 - First Person 54.89 FPS
Fill Rate 268.79 MTexels/s

[Dyre]

The motherboard is a no-name BX6. The multiplier seams to be jumper controlled while the fsb is adjustable in the bios.
It apears to have an 8x multiplier on it.