Which Matrox card to use on Super Socket 7 Pentium 250MMX O/C Using Asustek P5AB MB

[Martin]

I have a Pentium 200MMX overclock to 250Mhz using Asustek P5AB MB. I am using Matrox Mystique overclock to 206Mhz (PCI) presently. I am considering upgrading to another Matrox card. What would be the best
and suitable model. Appreciate any recommendations. Cheers!

[Kruzin]

G200 AGP or PCI is about your only choice. That machine would never driver a G400...

I would put that money towards a processor upgrade instead...

[SteveC]

Does it have an AGP slot? If not, it has to be a PCI card, probably the G200 is the best bet. But I'd agree with Kruzin - a new processor/board. But, if you just want to cheaply increase the speed of your PC, stick in a VoodooII - they're so cheap now, and it does the job (albeit with image quality below that of Matrox')...

------------------
Cheers,
Steve

PS: Some or all of the above message may be wrong, or, just as likely, correct. Depends on what mood I'm in. And what you know. ;¬)

[Zwisch]

Don't take this the wrong way but i recommend upgrading that CPU before putting some money on a passed generation graphic card.

Z